this post was submitted on 20 Jul 2023
24 points (85.3% liked)
Linux
48323 readers
672 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Using KVM, you can use do full GPU pass through to any OS from your host without a need for a second GPU (including integrated graphics).
Works with AMD and nvidia cards, I’ve even done this with a macOS VM.
Here’s a guide that’s the easiest I’ve found to follow. It includes some automated scripts.
https://github.com/BigAnteater/KVM-GPU-Passthrough - this guide is for Arch Linux, but the scripts and configs should work the same on any OS, you’ll just need to make sure the correct packages are installed.
Like you mentioned, there are some hardware requirements to do this, but most modern hardware supports it. Also, if you are running the VM then using SSH to control your host is probably your only option, but shutting down your VM should take you back to your display manager so there’s no rebooting.
I used this set up to play warzone for a while, performance was just as good as windows on bare metal.
Some notes from my experience:
2 There are 2 scripts that will be built for you, vfio-startup and vfio-teardown. They will unload and reload kernel modules as needed so you’ll want to check if they are needed. My nvidia drivers are built into the kernel, so I couldn’t unload them, which stalled the VM startup.