Buildapc

3811 readers

50 users here now

founded 1 year ago

MODERATORS

Lemmenmo@lemmy.world

Assembling a PC and looking for input (pcpartpicker.com)

submitted 11 months ago by ImminentOrbit@lemmy.world to c/buildapc@lemmy.world

13 comments fedilink hide all child comments

I grabbed a copy of the "High Refresh Rate Build" from PCMasterRace and wanted feedback.

I've not built a new PC in many years and last I heard was the NewEgg was trash and unreliable now. Is it decent again, or is it worth paying more to get it elsewhere?

Also, is there room for more storage? If I bought two of the SSDs, would there be room?

Other components decent?

And, finally, my so wants an RBG case, so any recommendations on one of those that would fit this stuff would be great.

you are viewing a single comment's thread
view the rest of the comments

[–] edgemaster72@lemmy.world 2 points 11 months ago* (last edited 11 months ago)

As to the last part of your post, for almost the same money you could get Montech's X3 Mesh case with 6 RGB fans included

https://pcpartpicker.com/product/HRH7YJ/montech-x3-mesh-atx-mid-tower-case-x3-mesh-black

Or you could save about $20 by going with 16 GB of RAM instead of 32 and swap to the 903 Max instead of the 903 Base, which comes with 3 ARGB fans

https://pcpartpicker.com/product/2MwmP6/montech-air-903-max-atx-mid-tower-case-air-903-max-b

If you're not familiar with RGB you might be asking why pay more for seemingly less. The difference is the ones in the 903 Max are addressable, meaning they can be controlled with software on the PC. Whereas with the X3 the RGB is fixed and it looks like you can only turn it on or off, no mention of even having different modes to cycle through.

(This is in addition to whatever differences in the two cases themselves)