3DPrinting
3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
Rules
-
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
-
Be respectful, especially when disagreeing. Everyone should feel welcome here.
-
No porn (NSFW prints are acceptable but must be marked NSFW)
-
No Ads / Spamming / Guerrilla Marketing
-
Do not create links to reddit
-
If you see an issue please flag it
-
No guns
-
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
view the rest of the comments
I got an Elegoo Mars awhile back so I have a resin and a filament printer (ender 3 pro). Resin printing can be fairly affordable just make sure to also get (or diy) a decent cleaning and curing station. Oh and gloves, lots and lots of gloves. Resin sucks to get on skin. I had one model that didn't cure right, I picked it up days after print and it cracked and resin poured out on my hands. Many days of my hands feeling burned
Was it a closed hollow model without drainage holes? I think some cured resins will actualy weaken if they are in extended contact with their uncured counterpart.
I thought it was a solid model and the inner sections didn't fully cute. Can't remember though. There were no drainage holes, I know that much.
The budget station all need rework. Bought an Anycubic cure & wash and had to upgrade the stepper driver to Trinamic to get smooth and silent rotation. Anycubic uses the old Allegro 4988.
Additionally, they use steel bearings within the tank that rust. You might want to replace them with polymer/ceramic/glass bearings.
For resin: I am considering exiting it. Resolution is very nice but FDM is easier to handle and in my experience less/quicker maintenance. Currently considering exploring additive-subtractive manufacturing.