Hardware

Yep, that was my intention. First, it's low power, so it can be always-on with only a small impact on the power bill. Second, it's only gonna serve a few things - my photography hobby and media library, and maybe a service or two will come with time. If I need other services, I put them on a Hetzner box and they're much better taken care of.

I've done my share of sysadmin work and even a bit of server-room maintenance, I don't want a full-time, or even a part time job. This is mostly gonna sit in the corner, and be quiet. If the prices matched, I would have probably just gone with QNap or Synology, but this way I get the NAS and the disks for the same price.

Yes, it didn't inspire confidence when it arrived so, but it's actually a tiny PSU, it's essentially all bolted onto the power connector :)

Sure, here's the breakdown:

AsRock J4125-ITX -> 120,62€ Crucial 8GB RAM kit -> 19,90€ 2 x Seagate IronWolf 4TB -> 2 x 114,99€ Samsung 870 EVO SSD 500GB -> 31,41€ (I originally ordered an NVMe one that cost 29€). Fractal Design Node 304 -> 91,89€ PicoPSU -> 35,95€ No-name Power Adapter (220V to 12V) -> 12,99€ Molex-2x Sata -> 9,99€ (there is a ~1€ option, but I wanted a nicer cable for some cable management.

A few cables that I had. Total: 552,73€

I wanted to get a 4-bay NAS, and QNAP, Synology or Asustor would be a bit less, but without the disks. Also, I wanted an x86 CPU, for potential future use. This way I turned out a little cheaper, and it is a bit more flexible.

I plan to try the OpenMediaVault first. For my use - a lot less for services and dynamic changes and a lot more for sitting in the closet quietly - it's good enough. And I can still dig into the internals if I wanted to.

And with OMV I can also teach my non-techy wife and kids how to add themselves more disk space :)

I like the case a lot. It surprised me as it was bigger than expected and than it looked like, but I should have seen it coming. For one, it has room for a full-blown PSU (and I have the PicoPSU), and for two, I picked it because it has room for 6 3.5" HDDs.

But it's still pretty small, it's nice enough that my wife would let me keep it in a living room :)

I thought about it, but I got rid of a lot of my electronic junk in the recent years and would have to buy everything from scratch anyway. So I went with the "small and silent and low-power" route. I also think it's going to live in a closet in my home office as well :)

Oh, I am enjoying it, but I didn't expect to start learning already. I thought I'll pick up a thing or two about the software side of things though, but most of the stuff I've been doing already for a long time. But yes, it's a deep rabbit hole.

Yes, in fact! Two main reasons.

• I wanted low-power, this is mostly gonna sit in the closet and serve files around. Even ARM CPUs like the RasPi can do that. But I didn't want it to be too weak, in case I wanted a simple service or two, this still has extra oomph. This isn't too powerful, but it is a 64-bit x86 CPU.

• I also wanted some ports. This has 4 SATA ports. It's supposed to be a NAS. It has a Gbit ethernet - I don't have a Gbit network at home so this is good enough for now, and I can expand it somewhat. It has USBs, expansion slots etc.

• those two combined resulted in a few selections, AsRock's mini-ITX boards with integrated CPUs are quite good choices in this space.

• I wanted low power consumption. I could have gone with a slightly stronger ‎J5040-ITX perhaps, but it's also using just slightly more power.

• it's also cheaper, the mobo with the CPU cost me 120€. The j5040 I mentioned would be a bit more - not a lot but still noticable.

• I wanted silent, and this board and CPU is passively cooled. If I had money, I would get SSDs for storage as well (less power, less noise) but it's a LOT more expensive.

I know there are other CPUs in this space but in the end you have to pick one so I did.

How did you find it for cable management?

Yes, the specs say less then 5W per HDD. Even if I had older and hungrier disks at 10W each, it's still good. The CPU is consuming about 10 watts, the rest of the board, let's say another 10. Even if I fill all six HDD slots that the case has room for, I think it would work.

Yes, I like it a lot. FD has this niche and does a good job.

My old HP laptop was referred to as having celery for a CPU. It was about capable of using Chrome without having a breakdown.

Well, look at these few things:

1. Modern CPUs, even Celerons, are powerful. People are driving a lot of workload even on ARM CPUs, and this is a proper 4-core x64 CPU. I mean, look at your phone, it's most likely doing a lot of full-hd media, right? And it's doing just fine.

2. Most commercially-available Home/Small Office NAS systems, by Synology, Asustor, QNAP and others, they have either CPUs in this class, or weaker, ARM CPUs. I'm not gonna be sitting at this box. I have 3 desktops and 3 laptops around the house for work - this is gonna be mostly storage.

3. My planned media management workload is a bit different than media processing. I mostly want to serve files around, maybe transcode something in the background. I don't plan to watch movies off of this (yet). I have a 4-core Hetzner VPS that is similar in power to this, and it's driving something like 4-5 docker containers and still serving all the files.

I think it's gonna be fine, but we shall see.

Thanks! I ordered a SATA SSD already, and I did plan to read about the E key slot later, but for now I'm good. The board has 4 SATA slots, so I will either have to have an USB OS disk or an adapter like this, but for now I'll just go with what I know.

Do you know what are the speeds like on that Sintech or similar adapter? I don't really need NVMe speeds, it's a simple OS disk, but I wouldn't like to go down to something bellow regular SSD speeds.

They are perfectly fine for a home NAS.

That is why I bought a few Ryzen powered Mini PCs. They have plenty of computational power and they are also power efficient.

Oh, I don't want this to be a PC. I have plenty of CPU power for what I do, this has a different purpose.

I'm not planning to run anything much on those Celerons - it's mostly just a file server. People do that with a RasPi - a 4-core CPU is going to blow it out of the water I think.