3DPrinting is a place where makers of all skill levels and walks of life can learn about and discuss 3D printing and development of 3D printed parts and devices.
The r/functionalprint community is now located at: !functionalprint@kbin.social or !functionalprint@fedia.io
There are CAD communities available at: !cad@lemmy.world or !freecad@lemmy.ml
No bigotry - including racism, sexism, ableism, homophobia, transphobia, or xenophobia. Code of Conduct.
Be respectful, especially when disagreeing. Everyone should feel welcome here.
No porn (NSFW prints are acceptable but must be marked NSFW)
No Ads / Spamming / Guerrilla Marketing
Do not create links to reddit
If you see an issue please flag it
No guns
No injury gore posts
If you need an easy way to host pictures, https://catbox.moe may be an option. Be ethical about what you post and donate if you are able or use this a lot. It is just an individual hosting content, not a company. The image embedding syntax for Lemmy is 
Moderation policy: Light, mostly invisible
Printed a simple soap tray- it was just a plate printed vertically- 3mm thick with rounded edges.
Prusaslicer settings were 1.5mm fuzzy skin with 2mm connection points, spiral mode with zero bottom infil, and a 3mm brim for adhesion. (The brim is easy to remove, and the edge looks nicer with with no infill.)
100%extrusion width.
not to be that guy... but to me it looks like the gunk-accumulator 3000!
So much cheaper that the gunk accumulators I usually buy
oh yeah. I've been fooling around with the fuzzy skin setting because I never used it (curiosity can get me like that.). Dad asked for one to fit inside his little shower's nook-shelf-thing after seeing a lamp shade.... This was a test print that's finding use in my own shower.
fuzzy skin +spiral mode also found use for an aeroponic's basket for those not-quite-aeroponic's towers. they provided a better net basket for things that have smaller root structures, while still draining fully.
Wash them. But it’s not going to turn moldy (it dries out quickly)
That's really neat, do you have a link to the STL?
I think the STL is just a rectangle
okay, cool - I'll try it out, thanks!
It is a rectangle, but the trick is to start the print with the nozzle 1mm off the bed to replicate the texture.