techsupport

2446 readers

8 users here now

The Lemmy community will help you with your tech problems and questions about anything here. Do not be shy, we will try to help you.

If something works or if you find a solution to your problem let us know it will be greatly apreciated.

Rules: instance rules + stay on topic

Partnered communities:

You Should Know

Software gore

Recommendations

founded 1 year ago

MODERATORS

GatoB@lemmy.world

Having constant crashes on both Windows and Linux (lemmy.ml)

submitted 1 day ago by mathias_freire@lemmy.ml to c/techsupport@lemmy.world

11 comments fedilink hide all child comments

Hello everyone. I have a system with Ryzen 9 7950x, 32GB 6400 mhz DDR5 ram, 1 TB primary SSD where Windows 11 and Linux installed and Gainward RTX 4080 graphics card and Asus Prime X670-P Wifi mobo. I also have 1 TB SSD and 2 TB HDD's mounted. 2-3 months ago, I started to get crashes on my both OS'es. And in time, they got frequent. I bought a brand new SSD for OS installation, after a while it started again. I cannot get any error message on Windows, since BSOD screen just stays for 2-3 seconds and system restarts. After restart, I sometimes get "no Bootable device found" error on boot stage. When the crash happens on Linux, dmesg outputs show something like whole SSD disconnected. It shows I/O messages for root partition as well. I changed primary SSD 1 month ago, errors still persist. Sent mobo to the service, no issues were found. BIOS also updated and reset. When I run PC on live Linux media, I get no issues however. What can I do else? What can cause this issue? Thanks in advance.

you are viewing a single comment's thread
view the rest of the comments

[–] OneCardboardBox@lemmy.sdf.org 1 points 1 day ago (3 children)

Did you replace your SATA cable when you installed the new SSD? Maybe the failure is there.

[–] mathias_freire@lemmy.ml 2 points 1 day ago (2 children)

SSD's are m2. Could it be about hdd's?

[–] CarbonatedPastaSauce@lemmy.world 2 points 1 day ago* (last edited 1 day ago) (1 children)

Is any part of the OS installed on the HDDs? If not, disconnect them and see if the OS is stable.

I’d also recommend running memory tests on your RAM just to eliminate that as a factor. You could also decrease the clock speed on your memory for a while and see if that helps.

After all that , if the issue persists, try disconnecting all storage and running Linux from a usb drive. If the system is stable at least you know it’s something in the storage, but if it keeps crashing you’ll know the storage errors are a red herring.

[–] mathias_freire@lemmy.ml 1 points 1 day ago

Memtests showed nothing. I also ran SSD check in BIOS settings, still nothing. I will try again. As of live Linux over USB, it's stable even with storage connected. I also have an installed system that may run to issues.