this post was submitted on 06 Jul 2023
122 points (99.2% liked)

sh.itjust.works Main Community

7732 readers
1 users here now

Home of the sh.itjust.works instance.

Matrix

founded 2 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
[–] TheDude@sh.itjust.works 97 points 1 year ago (21 children)

If I were to do some rough math I'd say it would cost about $300/CAD per month.

My goal is once we are approved to start accepting donations that I can purchase dedicated hardware for this instance. I'd get a used server at about $2300 which would be sufficient a good amount of extra users and through it into its own dedicated shared colo at about $100/month. Factor in about $300-400 a year for drive replacements and we are left with $2300 / 12 month= 191.66 + 100/month for the shared 1u colo + a budget of $400 for drive failures throughout the year $33/month. 191.66 + 100 + 33 = $324.66/month for the first year dropping to about $133 per month after the first 12 months. It's worth noting that this method would give us double the amount of resources and quite a bit of extra storage.

Ideally we don't keep this instance on a single server forever and start to think about spreading it over multiple hosts at or after around 100K users (or less if the number of active users is high).

If someone wanted to host an instance they would not need to allocate as much resources as I have to this instance and depending on how active the instance gets could run off something a lot less powerful.

[–] ScrawnyStork@sh.itjust.works 23 points 1 year ago (1 children)

I really appreciate the information, it's very interesting to me. Given that you have a fairly specific price in mind for a server, what kind of hardware are you thinking of?

[–] TheDude@sh.itjust.works 24 points 1 year ago (2 children)

Something with Dual CPUs, at least 128GB ram, dual 750W PSUs, hardware raid (12Gbps) and 8 x 2.5" SAS/SATA slots for SSD Drives on a raid 10

[–] Shit@sh.itjust.works 7 points 1 year ago (1 children)

Ddr4 or 5? I might have 128gb of rdimm ddr4 I'm never going to use sitting on my desk.

[–] your_mind_aches@sh.itjust.works 6 points 1 year ago (1 children)
[–] Shit@sh.itjust.works 3 points 1 year ago* (last edited 1 year ago)

Yeah registered dimm 4x32g. I couldn't find a way to put it in a low powered quiet box without spending a bunch of money. My home lab stuff is ddr5 now.

[–] humancrayon@sh.itjust.works 2 points 1 year ago* (last edited 1 year ago) (1 children)

This sounds exactly like the poweredge r530 I have in my homelab. Managed to snag it on eBay with those specs, minus drives, for $350.

[–] TheDude@sh.itjust.works 4 points 1 year ago

The 530 is 2U, the 630 is 1U size factor. Looking more at the 630

load more comments (19 replies)