this post was submitted on 18 Jul 2023
37 points (100.0% liked)

Home Improvement

9042 readers
2 users here now

Home Improvement

founded 1 year ago
MODERATORS
 

In my kitchen I have a flushmount light with an integrated led. I put in an LED dimmer on the switch and all is working well.

However, I had to replace it way sooner than I was expecting. Is there a possibly that the dimmer is hard on it?

I have the exact same one on another non-dimmer switch that is still running fine. That said the other one gets much less use so it could just be that.

you are viewing a single comment's thread
view the rest of the comments
[–] Fabulous_TRex@lemmy.world 2 points 1 year ago* (last edited 1 year ago) (3 children)

It’s probably the amount of use those lights get. Theoretically it should last longer.

Things to check:

  • Is your dimmer from a reputable brand, or unknown Chinese origin?

  • Is your LED bulb compatible with dimmers?

If there is a problem with the dimmer it would be hard to diagnose without an oscilloscope.

Chances are its a dead capacitor on the LED’s driver board. LEDs last for ages, but manufacturers build in planned obsolescence through shitty support components. If you have a multimeter with a capacitor test function you could rip the driver circuit out and test them to confirm.

Other thing to check would be to make sure your lighting circuit has all the lights connected in parallel. Assuming you have more than one bulb on that dimmer, if they are wired in series then the first bulb would be having to handle the current draw for all subsequent bulbs. I imagine if this was the case it would be burning out pretty quick tho. You would know if they were in series though because all your other bulbs would stop working at the same time, and (im not an electrician) i dont think that this would be up to code anyway, so pretty unlikely.

[–] Tandybaum@lemmy.world 1 points 1 year ago (2 children)

I can’t remember the dimmer brand but maybe I can dig it up. It would be an easy swap regardless and maybe worthwhile.

This is the only fixture on this switch.

[–] Fabulous_TRex@lemmy.world 2 points 1 year ago (1 children)

I wouldn’t worry too much right now. Just replace the bulb and see if it dies quickly again. Can’t draw too many conclusions from a sample size of one!

[–] Tandybaum@lemmy.world 2 points 1 year ago

Facts

Agree and thanks