I have a Thinkpad T470s running Linux Mint where the batteries suddenly stopped charging. The batteries are supposedly new (the laptop is a refurbished one) with battop showing a cycle count of only around 20 for both batteries when they stopped charging. The laptop is now running on mains only and will die once it is plugged out.

It seems as if it is the main battery (00HW022) that is defective, as battop first showed a voltage of around 5V, and then later did not register in battop at all. The secondary battery (01AV405) shows a voltage of 12.5V, but it is also not charging.

Locating local replacement batteries for the 00HW022 was a little more difficult than I expected with these machines. I have a replacement 01AV405, but I don't want to install it now as I suspect it is not the problem.

1. Can I remove just the 00HW022 and expect that the other battery can begin to charge again and allow the laptop to run on only that?
2. Is there a reason I would have a hard time finding a replacement 00HW022, or is that just a skill issue? Do they go under other names?
3. Is there any reason to believe that Linux is making things difficult here? I suspect that everything related to batteries is handled by the firmware and Linux is only reporting on diagnostic values and have nothing to do with the charging itself - is that correct?

Hi all, does anyone here have any experience with VTA? I'm thinking about getting this projector: VTA-70366, but I can't seem to find any reviews on the brand.

cross-posted from: https://lemmy.ml/post/48171005

This is an abridged version of 2026 RISC-V Market Report and Ecosystem Guide by the SHDgroup, provided at no charge thanks to the support of their sponsors. An unabridged version is also available with over 200 pages and comes with a spreadsheet containing over 300 tables of detailed information. In both versions, the intention is to provide a comprehensive examination of the rapidly expanding semiconductor market, including how it is evolving alongside the concurrent emergence of RISC-V and the influence of AI. The accelerating build-out of data centers for AI inferencing and training and Large Language Models (LLMs) is having a profound impact on semiconductor revenues worldwide. This impact extends to the adoption of the RISC-V ISA in an increasing number of SoCs aimed at including some level of AI functionality in the silicon solution. These impacts also extend to the Semiconductor Intellectual Property (SIP) vendors as they look to accommodate the acceleration of the different Neural Networks being used and EDA Tool vendors as they look to infuse AI functionality into their EDA tools to aid the productivity of silicon designers.

The introduction of RISC-V has fueled extensive CPU architectural exploration, visibly impacting device revenues, unit shipments, design starts, business models and IP licensing revenues on a global basis. The pervasive integration of AI across applications is a primary catalyst in today's semiconductor market. The RISC-V architecture has notably influenced SoC designers and architects and is poised to drive a substantial share of designs, revenues, and unit shipments in the coming years.

This is to challenge the creativity of the computer lover.

Some pictures of a build from last year. I replaced a file server that was in reliable operation since 2007, seeing no hardware failures. Its purpose is to store file backups from the network. With only 4,5TB available, it was constantly getting full. It was also loud and power hungry, so I decided that the best option was a complete replacement. I hope the new one is as trouble free as the old!

Old specs: (built may 2007, upgraded some drives late 2009)

• motherboard: TYAN S2925 "Tomcat n3400B"
• CPU: AMD Sempron 3000+ "Manila" (single core)
• RAM: DDR-2 ECC 800mHz 1GB
• operating system drives: HDD, Hardware RAID-1, SCSI-320, 2x 36GB, ext3 and XFS file systems
• served data drives: HDD, LVM, SATA-II, 3x 500GB and 3x 1TB, XFS file systems
• removable media: IDE CD drive
• operating system: Debian GNU/Linux, starting with version 4 "Etch"

New specs: (built september 2025)

• motherboard: ASRock B850M-X R2.0
• CPU: AMD Ryzen 5 9600X "Granite Ridge" (6 cores, 12 threads)
• RAM: DDR-5 ECC 2600mHz 32GB
• operating system drives: SSD, ZFS mirror, SATA-III, 2x 128GB, ZFS file systems
• served data drives: HDD, ZFS RAID-Z1, SATA-III, 3x 24TB, ZFS file systems
• removable media: USB 3.0 micro SD cards
• operating system: FreeBSD, starting with version 14

(Sorry if I'm posting this in the wrong community!)

A Raspberry Pi 5 I use (not the one in the photo) fell off the table, and the black square component pointed at by the arrow was straight knocked off the board. Yeah, if you needed a reason why you should always use a case, this is one, ooops lol...

It looks like it came off cleanly, leaving two square metal pads below. I still have the component, the small black box. This happened while the Raspberry Pi was running, and the power LED went from green to red in an instant. Afterward, booting was no longer possible. So, my questions:

1. If this happened while it was running, is it likely that this fried something else and it's not worth getting fixed? Or is this likely fixable?

2. If I want to get this fixed, how do you guys find a good local repair shop? I heard some apparently do sloppy soldering jobs, and given the RAM prices I would like not to have this Raspberry Pi unnecessarily damaged further if it's salvageable. I live in Freiburg im Breisgau in Germany, if anybody knows good local places.

cross-posted from: https://lemmy.ohaa.xyz/post/11345138

I recently aquired an old hacousto Accent 8x8 Audio matrix, however I cant find any still alive links for the companion software. The only lead ive found so far is an archived version of the website. Archive.org hasnt archived the actual file though. Does anyone know of any mirrors, repositories, archives, or other sources where something like this might still be available?

Edit: this guide doesn’t seem to mention it https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t480-type-20l5-20l6/20l6/20l6s01q2y/document-userguide

I was flashing Libreboot on to my ThinkPad T480, when I noticed this little button. Sorry for the poor images!

asil

cross-posted from: https://lemmy.ml/post/44200610

RVA23 profile of RISC-V marks a turning point in how mainstream CPUs are expected to scale performance. By making the RISC-V Vector Extension (RVV) mandatory, it elevates structured, explicit parallelism to the same architectural status as scalar execution. Vectors are no longer optional accelerators bolted onto speculation-heavy cores. They are baseline capabilities that software can rely on.

RVA23 doesn’t force scalar execution to become deterministic. It simply makes determinism viable because the scalar side is no longer responsible for throughput. The vector unit handles the parallel work explicitly, and the scalar core becomes a coordinator that can be simple, predictable, and low‑power without sacrificing performance.

To understand why this shift matters, it helps to recall how thoroughly speculative execution came to dominate high-performance CPU design. It delivered speed, but at increasing cost—in power, complexity, verification burden, and security exposure. RVA23 does not reject speculation. Instead, it restores balance. It acknowledges that predictable, vector-driven parallelism is now a credible, mainstream path for performance growth.

so i already have 240W charging over USB-C (framework16), but it would be great if there was a way to also transfer data over the very same cable for low priority USB devices. every hub i found maxes out at 140w per port and the powerbrick does not include a way to inject data.

does anybody know of a way to add data to the mix without compromising power? it would only need to provide a single USB "access point" for that data

note: i do not posess the tools required to safely work on the powerbrick itself, so thats out of the question

Hi, does anybody know which kind of nuts should I buy to attach my M.2 standoffs? My motherboard seems to not have any and obviously without the nuts it doesn't matter if I have screws and standoffs.

...there is a way? What possible application/need would make this necessary/feasible? Sure, my M.2 drives run hot, especially when doing continuous I/O for prolonged periods, but... Maybe I'm just inexperienced. (:

Edit: the link might appear... Fishy? So I added an image.

Edit2: which seems to have deleted the link https://www.newegg.com/p/3C6-038N-00JC6

Instead of just cooling my one router, I thought I'd share the love with some other pieces of equipment too. I bought three older Noctua fans: https://www.noctua.at/en/products/nf-s12b-redux-700/specifications

I also bought a somewhat more powerful DC adapter (max capacity 27 Watts instead of 3.6), tied it all together, and now I'll shut up for good.

Thank you all! :)

Follow the link for background info!

Thank you so much for all the great advice! What a nice community! :)

I pushed out the pins from the 4-pin connector using a SIM tool:

I bought a 12V DC power supply with adjustable voltage (3~12) so that I can adjust the fan speed to my liking (noise, temps). The power supply came with a bipolar terminal. How in the world could I be this lucky. No need to carve any wires here (although it would have been nice to finally learn how to do that too...):

I put back the sense and control pins into the connector in order to avoid accidental shorts and what not. I have no idea why ground goes into the negative node, but it was the only plausible configuration, since the power simply has to come from the positive node, according to conventional current:

And voila! I have no idea why I'm unable to upload the GIF of my fan spinning, so you'll have to take my word for it.

Thanks again!

My computer recently developed an error where the hardware clock displays the time as follows

System date [Mon 31/63/25755]
System time [63:28:25]

The clock runs.

I've tried all the usual tactics: remove CMOS battery, short the pins to force a reset, put fresh battery, reflash BIOS. Nothing.

On boot, I get an error on reading the hardware clock and the system defaults to 3 of September, 2025.

I think I'm looking at a mobo heading to the e-waste bin.

The board in question is a GygaByte AB350M-DASH. It still runs but it's a bit annoying having to set the system clock every single time I boot up the machine.

Any advice on the matter is welcome.

I disassembled an AMD CPU Wraith Cooler, meaning, I took the fan off of the heatsink, because I want to attach the fan on top of a Raspberry Pi that I'm using as a router. The Pi runs quite hot because it transmits several hundred megabytes per second, non stop, and I want to give it some cooling. (It already has its own heatsinks on its various chips inside the chassi and I don't want to use the little shitty Okdo fan, because it's loud.)

Is there any smart solution to how I could power this 4-pin fan? It needs 12V DC.

This is the Pi with its chassi.

And I'm considering something barbaric like this.

~~Are there perhaps conveniently positioned GPIO pins on the Pi that the 4-pin connector could just slide on to and just work?~~ Never mind this. The Pi 4 that I'm using can only output 5V:

Or would I need to cut off the 4-pin connector to expose the individual wires and attach them to a 12V DC adapter?

Or any other genuis solutions? :)

Just wanted to share a pretty sic "notebook kit" that I found at a thrift store. I didn't buy it since I don't need it (I'm carrying around an XTRFY M42 RGB PINK and a Deltaco WK90B TKL). But the fact that it even has RJ11 connectors just blew me away.

Mods: Feel free to remove this post if it doesn't fit here

Can high quality animation be done on a DDR4 ram ??