this post was submitted on 23 May 2024
41 points (90.2% liked)

Technology

59607 readers
3045 users here now

This is a most excellent place for technology news and articles.


Our Rules


  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots


founded 1 year ago
MODERATORS
 

I've got a audio/tech question, maybe someone here might have some insight into.

I'm in need of noise cancellation for various and sundry reasons. i own a pair of BOSE ANC headphones which are tits, but have been looking for a pair of GOOD ANC earbuds that don't cost $300 bucks, and had an idea that all ANC appears to be, when you break it down, is sound that the earphones/earbuds produce which bounce around in the ear canal and hit the ear drum in certain ways as to "cancel" out various types of background noise.

Again the ANC on my BOSE are amazing. Does anyone know, or have even heard of (no pun intended) anyone who has produced "noise cancelling" sound files?

It seems as if noise cancelling hardware like earphones are producing sounds that cancel out noise, mp3/flac files of "noise cancelling" sound could be on offer somewhere.

Dunno, figured i'd ask. Hope this is the right place to do that, and I'm not breaking any rules, I didn't know where else to post this.

all 32 comments
sorted by: hot top controversial new old
[–] adam@doomscroll.n8e.dev 57 points 6 months ago (2 children)

The sound produced by ANC is the exact 180 degree inverse (or as near as possible) of the incoming bad noise.

It's produced in realtime by dedicated signal processors and requires mic arrays feeding in the sound. The quicker your processing pipeline the better the match is and the more powerful the effect is.

There's no prerecorded sound that would work.

[–] JustinTheGM@ttrpg.network 2 points 6 months ago (1 children)

I've always wondered, does the ear experience additional, unheard "loudness" when using ANC?

[–] adam@doomscroll.n8e.dev 1 points 6 months ago (1 children)

Yes. On older generation/cheaper ANC this is perceived as increased "pressure". It doesn't seem louder but the physical sensation of loudness is there.

[–] laurelraven@lemmy.blahaj.zone 1 points 6 months ago

That actually explains the sensation I have with headphones provided by my work, I want to like them but the sensation is kind of unpleasant

[–] Boozilla@lemmy.world 16 points 6 months ago* (last edited 6 months ago) (1 children)

The A in ANC stands for Active. It is actively listening to ambient noise in your environment to cancel it out with a waveform tailored to do so in real time. If the noise in your environment is very static (like a hum or whirring) it might be possible to embed a cancelling sound in the audio file. But it's likely it still won't line up properly to really cancel it. It's more likely to cause a worse sound because of being out of phase (like two leaf blowers going at the same time).

I hope that makes sense.

[–] stealth_cookies@lemmy.ca 9 points 6 months ago

Do you want to just block all sound or do you want the extra features that come with active noise cancellation headphones like speech passthrough? What you are proposing doesn't exist because it makes no sense, active noise cancellation is done by recording the audio outside the headphone, inverting the amplitude and attempting to align the phase to cancel it out in real time.

In reality active noise cancellation only works for more or less constant sounds below 1000Hz, anything higher than that and the headphones block exactly as much noise as any other pair of sealed headphones.

You will get better noise reduction with IEMs than headphones, deep insertion headphones like Etymotic beat the pants off Bose for noise isolation at every frequency, are cheaper, and as a plus sound better than any noise cancelling set you can buy.

[–] SuperJakish@lemmy.world 4 points 6 months ago* (last edited 6 months ago) (2 children)

There have been a lot of ANC responses focusing on the A (active) part. There are two parts to nose cancellation: active and passive. I agree ANC are sweet and all... The other comments have that covered.

If you're interested in exploring a potentially low cost alternative to expensive ANR headphones or earbuds... Know that there are two parts to noise cancelling: active and passive. Passive nose cancelling is how much the headphones or earbuds reduce the outside noise before the active part needs to step in.

SO, an option I haven't seen discussed yet would be to get some standard low cost earbuds and get some over-ear ear muffs to put around them.

Edit: literacy is for everyone... I didn't see the bit about using this for sleep. Over ear muffs plus earbuds wouldn't be very comfortable. Another option might be just finding some noise sounds you prefer over the nose you like. There are different standard noises... White noise, pink noise, brown noise... These might help make the frequency of unwanted sound your looking to block. This is a link related to noise colors after a quick search: https://www.hatch.co/blog/exploring-color-noises-for-better-sleep-with-hatch

[–] quinkin@lemmy.world 2 points 6 months ago

Along these lines though when I did a lot of wood cutting I would buy the foam ear plugs, cut them shorter then use a hole punch to create a centre through hole that fit my earbuds. Replacing the stock rubber/silicon pads.

I would then compress the ear plugs with my fingers like you normally would and slip the earbuds in.

I would guess the earplugs efficacy was slightly reduced but it let me listen to music and podcasts while slinging a chainsaw for hours at a time without having to have ear damaging sound levels. I always used a helmet and earmuffs over the top for extra isolation.

[–] TimeSquirrel@kbin.social 4 points 6 months ago (1 children)

You need the live background noise to produce an inverted sound wave which will cancel it out. You don't have that in a piece of data or software.

[–] darcmage@lemmy.dbzer0.com 3 points 6 months ago

Great ANC is still a premium feature that you'll pay a premium price for. But good ANC has made its way into the budget space and if you're willing to compromise on some features, you'll find some decent options. I usually pay attention to rtings reviews: https://www.rtings.com/headphones/reviews/best/noise-cancelling-earbuds

[–] taaz@biglemmowski.win 2 points 6 months ago (1 children)

Afaik you have to replicate the same wave but in opposite "direction" (up/down sinus) to cancel out incoming sound so any anc earbuds have to have microphones and are dynamically shaping the sound.

[–] Donjuanme@lemmy.world 2 points 6 months ago* (last edited 6 months ago)

You're asking for twice as much noise into your ears?

I'm certain there are recordings of background noise, but none of it will do what you're asking. It'd be like trying to cancel a recording of your voice by talking over it. A fun experiment to get the grandkids to do when they go home. Better yet, on the car ride home.

[–] Takeshidude@lemmy.world 1 points 6 months ago

If you're okay with earbuds, Pine64's PineBuds purportedly have ANC

[–] LanternEverywhere@kbin.social 1 points 6 months ago* (last edited 6 months ago)

You're putting the cart before the horse. Tell us the specific situational problem that you're trying to solve. Like what ultimate end result are you trying to achieve.

That way we can help you achieve what you're actually trying to achieve

[–] Zurgo@lemmy.dbzer0.com 0 points 6 months ago

I've had a couple of good experiences with budget ANC buds, I used scarbir.com for his budget reviews, especially like that he assesses their phone call quality.