this post was submitted on 12 Nov 2024
385 points (98.2% liked)

196

16542 readers
1956 users here now

Be sure to follow the rule before you head out.

Rule: You must post before you leave.

^other^ ^rules^

founded 1 year ago
MODERATORS
 
top 17 comments
sorted by: hot top controversial new old
[–] AlligatorBlizzard@sh.itjust.works 49 points 1 week ago (1 children)
[–] LordAmplifier@pawb.social 21 points 1 week ago

Aww dang, electricity is homophobic? turns off the lights

[–] richardisaguy@lemmy.world 28 points 1 week ago (1 children)

Yeah, that happens sometimes; Last time my friends had gay sex at my house i had to call the fire department. When the firemen came they couldn't understand why the house kept setting itself on fire after it was already extinguished, that was, until they tried checking in my closed.

[–] Ashen44@lemmy.ca 17 points 1 week ago

is this what they mean by flaming homosexuals?

[–] Dasnap@lemmy.world 24 points 1 week ago (1 children)
[–] Oxen@lemmy.dbzer0.com 10 points 1 week ago* (last edited 1 week ago)

Ménage à trois: Edit: they may need an adapter

[–] felykiosa@sh.itjust.works 15 points 1 week ago (1 children)
[–] A_Union_of_Kobolds@lemmy.world 26 points 1 week ago (1 children)

We call em "suicide cords" in the electrical business

[–] cygnosis@lemmy.world 6 points 1 week ago* (last edited 1 week ago) (3 children)

Explain why, please. I'm not an electrician, but as I understand it, when you install an electrical socket the same three wires in the romex cable provide power for both plugs. Effectively each of the holes in the top plug is bonded to the same hole in the bottom plug. So why would connecting them with an external wire cause a problem? Even if two outlets are right next to each other, and one has reversed polarity, you'd just be connecting neutral to neutral and hot to hot. I don't understand why it's a fire hazard.

edit: last two sentences are wrong. If one plug has reversed polarity and one doesn't you'd be connecting two wires from hot to neutral, and that would probably just blow a fuse.

[–] glizzyguzzler@lemmy.blahaj.zone 11 points 1 week ago* (last edited 1 week ago)

They’re also often used to connect a portable generator’s 120V outlet to a house’s 120V outlet, thus energizing the house circuit during a power outage. But they have no way to lock in so can fall out and become a naughty cattle prod or if the person forgot to disconnect their circuit breaker from the mains they’ll kill a person fixing the power because that lineperson won’t be expecting live wires.

Basically as you said, if you do everything right you escape with your life. But if you do it wrongk, house fire or murder!

[–] Cheradenine@sh.itjust.works 8 points 1 week ago (1 children)

you are correct, the problem is if you plugged one end into mains that were energized the other end would be live. That can be exciting.

[–] cygnosis@lemmy.world 10 points 1 week ago

hmm. I see. By plugging in only one side you're creating a 120v cattle prod. Yeah, that would be hazardous.

[–] indepndnt@lemmy.world 4 points 1 week ago

In addition to what the other person said, (in the US) if the connection was made between sockets on different circuits, the voltage potential between the two hots could be 240v, making the hot wire a huge heating element, thus the fires.

As I understand it, one typical use case for these things is Christmas lights, and getting confused by a big tangle of light strings makes plugging in both ends in very different places an easy mistake to make.

Also I wouldn't take for granted that your outlets are wired correctly.

[–] Marty_TF@lemmy.zip 6 points 1 week ago

i suddenly have an excellent idea involving nivk fuentes house

[–] DragonsInARoom@lemmy.world 4 points 1 week ago (1 children)

Not if they have to be fused by law, like developed countries

[–] Cheradenine@sh.itjust.works 7 points 1 week ago (1 children)

Who else besides the UK uses fused plugs?