this post was submitted on 22 Jan 2024
308 points (96.7% liked)

Linux

48356 readers
473 users here now

From Wikipedia, the free encyclopedia

Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).

Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.

Rules

Related Communities

Community icon by Alpár-Etele Méder, licensed under CC BY 3.0

founded 5 years ago
MODERATORS
 

Tinkering is all fun and games, until it's 4 am, your vision is blurry, and thinking straight becomes a non-option, or perhaps you just get overly confident, type something and press enter before considering the consequences of the command you're about to execute... And then all you have is a kernel panic and one thought bouncing in your head: "damn, what did I expect to happen?".

Off the top of my head I remember 2 of those. Both happened a while ago, so I don't remember all the details, unfortunately.

For the warmup, removing PAM. I was trying to convert my artix install to a regular arch without reinstalling everything. Should be kinda simple: change repos, install systemd, uninstall dinit and it's units, profit. Yet after doing just that I was left with some PAM errors... So, I Rdd-ed libpam instead of just using --overwrite. Needless to say, I had to search for live usb yet again.

And the one at least I find quite funny. After about a year of using arch I was considering myself a confident enough user, and it so happened that I wanted to install smth that was packaged for debian. A reasonable person would, perhaps, write a pkgbuild that would unpack the .deb and install it's contents properly along with all the necessary dependencies. But not me, I installed dpkg. The package refused to either work or install complaining that the version of glibc was incorrect... So, I installed glibc from Debian's repos. After a few seconds my poor PC probably spent staring in disbelief at the sheer stupidity of the meatbag behind the keyboard, I was met with a reboot, a kernel panic, and a need to find another PC to flash an archiso to a flash drive ('cause ofc I didn't have one at the time).

Anyways, what are your stories?

(page 4) 50 comments
sorted by: hot top controversial new old
[–] musicmatze@lemmy.ml 5 points 10 months ago* (last edited 10 months ago)

Not really a "braking my linux setup", but still fun as hell! Back in university, a friend of mine got a new notebook at a time... we spent the night at the university hacking and they wanted to set the notebook up in the evening. They got to the point where they had to setup luks via the cryptsetup CLI. But they got stuck, it just wouldn't work. They tried for HOURS to debug why cryptsetup didn't let them setup LUKS on the drive.

At some point, in the middle of the night (literally something like 2 in the morning) they suddenly JUMPED from their seat and screamed "TYPE UPPERCASE 'YES' - FUCK!!!"

They debugged for about six hours and the conclusion was that cryptsetup asks "If you are sure you want to overwrite, type uppercase 'yes'". ... and they typed lowercase. For six hours. Literally.

The room was on the floor, holding their stomach laughing.

[–] acow@programming.dev 5 points 10 months ago

I've had the typical disasters with partition tables and boot loader mixups, but the one I keep coming back to is updating my Nvidia drivers too eagerly. Whether something gets messed up with an external monitor, or the laptop starts resisting switching away from the integrated GPU, or an electron app I use regularly that makes heavy use of 3D acceleration breaks, or I just need to bump the driver version in a reproducible system state record... it's just bad news.

[–] marionberrycore@lemmy.blahaj.zone 5 points 10 months ago

About a year ago I somehow fucked up installing a new window manager on my tablet so badly I had to start from scratch - to this day I have no idea what happened there, but it just wouldn't boot properly or anything after that 🤷 I needed it for school pretty quickly though so my top priority was getting it working again, so I set up a fresh install instead of continuing to fuck around.

Not the same level of destruction, but I fucked up my first ever install a couple months in trying to resolve dependencies related to python and wine, which is why I'm more interested in sandboxing whenever feasible these days. After only two months I guess I had been fucking around with linux long enough to have a little too much unearned confidence, lol

[–] UnfortunateShort@lemmy.world 5 points 10 months ago (3 children)

Accidentally deleted system Python, which on GNOME meant my DE was toast as well. Luckily very freshly set up, so no harm done.

Related note, add this in your shell profile:

bash
export PIP_REQUIRE_VIRTUALENV=true

proper scripting language
set PIP_REQUIRE_VIRTUALENV true

load more comments (3 replies)
[–] tanuki@lemmy.world 5 points 10 months ago

The first time I wanted to try Linux I did by installing elementary OS in dual boot mode (with windows) and everything went well, I played with it a bit and then I returned to Windows..

So, few days after that I realize that I have a lot of space in the Linux partition and I didn't have plans to use it anymore so I go to drive's & partition's manager on windows to delete my elementary OS partition..

Oh Lord when I restarted my PC, grub was showing nonsenses and I couldn't boot on windows again, I was in panic, I spent the rest of the day trying to fix grub to boot windows. At the end of the day I did it and save all my files and I uninstall grub properly, but what a day 😂

[–] FollowingTheTao@lemmy.dbzer0.com 5 points 10 months ago

I wanted my top bar in DWM toshow the time, so I put the script directly into the .xinitrc file instead of the path to the script.

[–] elax102@lemmy.world 4 points 10 months ago* (last edited 10 months ago) (1 children)
load more comments (1 replies)
[–] Tarogar@feddit.de 4 points 10 months ago

I suppose it doesn't quite qualify as breaking the system in a funny or stupid way but it certainly was one of those stupid things that was easy to fix after a ton of trouble shooting, ignoring the issue for a while and trying to fix it again.

So i had an old pc where I had a failed hard drive which I replaced. Obviously I also accidentally unplugged my optical disc drive and plugged it back in. Now that failed drive was just a data drive so the system should have booted up no problem since the os was on a SSD but instead it got a kernel panic and got stuck at boot. Since it was late I left it at that and came back to that the next day where it would still not boot. So I unplugged the disc drive and looked up what it could be. Tried a ton of different possible solutions but every time I added that disc drive it would panic.

I eventually kind of gave up and just didn't use that disc drive at all and just had it as a paperweight in the system. Unplugged and all that. When my replacement SSDs for my old data drive and backup drive came in I tried again to get that optical drive working but to no avail. So I unplugged it again, got it all set up and ran into another issue where for some reason Linux couldn't properly use my backup SSD. So I investigated that as well and trough some miracle found a post on the forum from my Mainboard manufacturer... Turns out that particular Mainboard had a data retention chip on it that didn't like Linux.

So naturally I just plugged everything into the data ports that were not controlled by that chip and it all worked as intended.

Stupid dumb chip on a Mainboard, all I had to do was try the simple idea of unplugging and trying a different connector but instead I did all that other stuff first that didn't work and cost me so much of my time.

Moral of the story, when in doubt try and put stuff on different connectors and see if that fixes it. Might just be a dead connector for all you know. Or an incompatible chip on the Mainboard.

FWIW I bought that Mainboard long before I switched to Linux and didn't plan at all to switch at the time. But that's a different story.

[–] ethanolparty@lemmy.ml 4 points 10 months ago (1 children)

A few years ago I was having obscure audio problems on Ubuntu so I tried replacing pulseaudio with pipewire. I was feeling pretty cocky with using the package manager so I tried

sudo apt install pipewire

Installed successfully, realized nothing changed, figured maybe I had to get rid of pulseaudio to make it stick.

sudo apt remove pulseaudio

Just two commands. Instant black screen, PC reboots into the terminal interface. No GUI. Rebooting again just brings me back to the terminal.

I fixed it eventually, but I'm really not very computer literate despite using Linux, so I was sweating bullets for a minute that I might have bricked it irreversibly or something.

load more comments (1 replies)
[–] callyral@pawb.social 4 points 10 months ago

and a need to find another PC to flash an archiso to a flash drive ('cause ofc I didn’t have one at the time).

you can do that from your phone using etchdroid

i don't remember ever breaking my system in a terrible way, but when i started using linux (with linux mint) i uninstalled ca-certificates and i think that uninstalled the whole DE

[–] cyberfae@lemmy.world 4 points 10 months ago

I can't remember what I did to break it, but back when I was in high school I was tinkering right before class and rendered my laptop unbootable. I booted into an Arch Linux USB, chrooted into my install, found the config file I messed with, then reverted it. I booted back into my system and started the bell ringer assignment as quickly as I could. I had one minute left when the teacher walks by, looks at it, and says that I did a really good job. She never knew my laptop was unbootable just 2 minutes earlier.

[–] bitwolf@lemmy.one 4 points 10 months ago* (last edited 10 months ago)

The only time was within a VM. I accidentally wrote

rm -rf ./* while my cwd was /

I use absolute paths with -rf now, to prevent the error again.

Every other breakage I had was with apt shitting itself. It has always been fixable just annoying.

I now use Fedora, to prevent the error again.

[–] drathvedro@lemm.ee 4 points 10 months ago (3 children)

Actually, I have a story that I'd consider an achievement even though it was extremely stupid and by all accounts should've bricked the system but didnt.

So I was on windows and wanted to install linux as a dual-boot on the main drive. The problem was that my mobo didnt like this particular and the only flash drive I've had, dropping it out mid-boot, before I got any usable terminal, so a usual install method wasn't an option. So I had this crazy idea to start a vmware vm in windows and pass the linux iso and the boot drive directly to it and try to install it live over the running system. Unfortunately, vmware guys thought of this and there's a check that disallows passing the boot drive to vms. So i created a bunch of .vmdks for another drive and fiddled with them in notepad until I somehow managed to trick vmware and at some point it started booting the same windows copy that I was sitting on. I quickly powered it off, added the linux iso and proceeded to install like I usually would. It did involve some partition shuffling, but, somehow, it went smoothly, linux installed, grub caught on, and even windows somehow survived, even though it was physically moved around on the disk. It serms that vmware later patched this out, because later in an attempt to re-create the trick of running the same copy of windows twice, but after updates to both windows and vmware, I was met with the same old error that boot drive is not allowed when trying to add that same virtual drive I had laying around.

[–] JATtho@sopuli.xyz 3 points 10 months ago

I had a similar debacle, when I managed to corrupt a btrfs file system to point it wouldn't mount again...

I was preparing it to have as my main system on bare hardware. I had accidentally mounted the same block device simultaneously in the host and guest: kablamo silent corruption and all 5 hours of progress lost.^*^ :(

*shred the guest VM, host was ok.

load more comments (2 replies)
[–] gianni@lemmy.ml 4 points 10 months ago

Just yesterday I overwrote some pacnew files and borked user authentication for myself. Very rough time

[–] haruajsuru@lemmy.world 4 points 10 months ago* (last edited 10 months ago) (2 children)

I mistyped my SU password when setup the OS...

load more comments (2 replies)
[–] thomasdouwes@sopuli.xyz 4 points 10 months ago* (last edited 10 months ago) (1 children)

I was testing a custom initramfs that would load a full root into a ramdisk, and when I was going to shut down I tried to run rm -rf --no-preserve-root / to see what would happen, since I was on a ramdisk anyway. The computer would not boot after that because it nuked the UEFI options.

load more comments (1 replies)
[–] inetknght@lemmy.ml 4 points 10 months ago

I was running Fedora. Something like 27 or so. I needed drivers. I don't remember if it was AMD or Nvidia, but they were only available on RedHat.

So I downloaded the RedHat drivers for the GPU and forced it to install. It worked! It was great.

Then when I updated the distro to the next release... everything failed. It was dropping into grub, but no video was output. Ooof.

So I ended up enabling a terminal console and connecting to it via a serial port to debug. I had to completely uninstall that RPM and I was never happy that it was properly gone. So a few months later I ended up reinstalling the whole OS.

On the plus side, I learned a lot about grub and serial consoles. Worth it.

[–] tigerjerusalem@lemmy.world 4 points 10 months ago* (last edited 10 months ago) (3 children)

sudo apt upgrade -y

To this day I can’t figure out why it killed the GUI and all terminal commands on a Mint install…

load more comments (3 replies)
[–] dosse91@lemmy.trippy.pizza 3 points 10 months ago

Before I understood how to properly build and test mesa (graphics driver), I compiled it and then procedeed to manually symlink the files in the lib and lib32 directories. When I pressed enter on that ln command, the UI immediately crashed and X would no longer start after rebooting the computer. Reinstalling mesa from a virtual terminal wouldn't fix it so I just reinstalled the system. Good times :)

[–] KingThrillgore@lemmy.ml 3 points 10 months ago* (last edited 10 months ago)

I had rEFInd and GRUB installed entirely by accident, and a botched update for Arch hosed my entire EFI setup making it impossible to boot Linux or Windows w/o a LiveCD. Thankfully it self repaired once I nuked rEFInd. I ended up going back to Ubuntu, but I hate snaps. I still would recommend Arch for most Linux users who want the power windows.

[–] AlijahTheMediocre@lemmy.world 3 points 10 months ago

I somehow locked myself out of sudo when trying to give my user permission to read serial devices.

Had to reinstall.

[–] zako@lemmy.world 3 points 10 months ago

rm -rf /var

I don't know what I was thinking on to type it 😅

load more comments
view more: ‹ prev next ›