Soap Making

175 readers

16 users here now

Do you make soap? Talk about it!

founded 2 years ago

MODERATORS

itsworkthatwedo@sh.itjust.works

So I tried to make hot process soap today (sopuli.xyz)

submitted 4 months ago by Jake_Farm@sopuli.xyz to c/soapmaking@sh.itjust.works

9 comments fedilink hide all child comments

I am pretty sure I over cooked it. I kept waiting for the mixture to look glossy but it was only ever partial so I wound up cooking it for 3 hours before deciding to just put it in the mold anyway and the soap doesn't hold together very well. I am leaving it in for a day but when I was pressing it into the mold it just felt like it wasn't forming a cohesive whole.

you are viewing a single comment's thread
view the rest of the comments

[–] Jake_Farm@sopuli.xyz 2 points 4 months ago (1 children)

That is called trace from what I understand, and that is where the cold process stops. The only issue being that it must then cure for a month in order to allow the full saponification reaction to occur.

[–] merde@sh.itjust.works 1 points 4 months ago

with time i ended up making cold process then 🤷

it was taking hours when i started, this (apparently cold process) takes 10'. I start using these soaps after a week or less. Maybe it's because i start with a hot lye solution and warm oil that it doesn't need a month to cure 🤷