this post was submitted on 30 Sep 2024
29 points (93.9% liked)

Mechanic Advice

278 readers
1 users here now

This community is for getting help with vehicle or other mechanical problems.

Remember, there are no stupid questions, we want everyone to feel welcome. If you don't want to answer a question that you think is silly, then just move on and keep it to yourself.

Rules:

  1. Don't be a dick

That is all.

founded 2 years ago
MODERATORS
ikidd@lemmy.world
BallsInTheShredder@lemmy.world
Brandonb0013@lemmy.world
29
Advice for changing break pads (lemm.ee)
submitted 2 months ago by WanderingCat@lemm.ee to c/mechanicadvice@lemmy.world
24 comments fedilink hide all child comments
 

So it's come the time to break the pads on my car which is a Kia Rio. I've looked up a few things and the job seems doable by myself which saves a lot of money.

The only thing that I can't seem to find a concrete answer is if they actually need to be bled once the new pads are installed?

Thank you

you are viewing a single comment's thread
view the rest of the comments
[–] SirSamuel@lemmy.world 4 points 2 months ago (1 children)

I don't know Jack about Kias, but this is how I change my pads.

I use a large C clamp to compress the brake cylinder into the caliper, which releases the pressure on the existing pads and gives room for the new pads going on. I take it slow, and have never had issues using this method

For bound bolts/nuts I use a 50/50 mix of acetone and transmission fluid on any offending parts. I wait a few minutes for it to soak in, and voila! Don't waste time with WD40, go straight to the good stuff

Since you haven't opened anything within the brake fluid system, there's no need to bleed. Except your knuckles. Wear gloves

[–] Successful_Try543@feddit.org 2 points 2 months ago* (last edited 2 months ago) (1 children)

To push the pistons of the rear brakes back, you probably need a special mechanical device that rotates the piston while simultaneously applying pressure to push it back.

[–] SirSamuel@lemmy.world 2 points 2 months ago (1 children)

My Transit van will probably be the first vehicle I don't do my own brakes on. I've heard the rear brakes are a chore. Sounds like Kia rear brakes are similarly annoying

[–] Successful_Try543@feddit.org 1 points 2 months ago* (last edited 2 months ago)

I only know from the Kia Picanto and Ford Focus, both about 20 years old. It isn't overcomplicated and the "special" device isn't that expensive, a set that will work on (almost) any car costs about 20 €.