homeassistant

11969 readers

15 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 1 year ago

MODERATORS

GreatAlbatross@feddit.uk

Home-Assistant Compatible Hub Needed (lemmy.world)

submitted 3 weeks ago by seperis@lemmy.world to c/homeassistant@lemmy.world

16 comments fedilink hide all child comments

My SmartThings Hub is (slowly) starting to error out more and more. I'm doing a soft reset monthly to keep everything up ( I did a hard reset about a year ago when I moved), which works, but I think it's time I start learning a new hub, preferably one not discontinued. My original plan was to put everything in Home Assistant when this time came, but a.) I really like it as my home coordinator with my custom scripts and addons and I don't want to mess with what is working right now and b.) while I'm getting the hang of running zigbee on there, zwave is in progress and thread...not really working most of the time.

So. I need to buy a general all-protocol hub; any recommendations that are fully compatible with Home Assistant? One with custom scripting would be a huge plus; I miss doing that in SmartThings.

you are viewing a single comment's thread
view the rest of the comments

[–] GreatAlbatross@feddit.uk 1 points 2 weeks ago (2 children)

z-wave may be easier than expected, as I think the devices stay linked to the hardware dongle used. (This is just from memory, mind!). But if you need to change the dongle, perhaps less fun.

imo, it will be a bit of pain to get everything inside HA, but once it's done, you'll be inside a platform that is pretty open, and commonly used, with lots of other people (hopefully) posting up solutions to problems before you encounter them!
And because it's software that will run on pretty much anything, you have the reassurance that even if something crazy happened, you could just reinstall an old version.

If it were me, I'd clear an entire weekend day, power off the old kit, and work away at getting HA controlling everything.

[–] sandwichsaregood@lemmy.world 2 points 2 weeks ago* (last edited 2 weeks ago)

Zwave is irritating to migrate, in theory the configuration is stored on the stick/radio but in reality it only stores some basic info and the pairing keys. You end up needing to re-interview everything for Home Assistant to know what it's talking to. Last time I had to do it I ended up just resetting and repairing everything from scratch. I think the secure pairings in the newer Zwave revisions also has some quirks to migrate.

[–] seperis@lemmy.world 1 points 2 weeks ago

Oh, I backup religiously since Blue failed right after I moved and backup my backups on my laptop as well. (literally failed; I lost everything and had to run photorec and three other tools to pick out everything I'd done for the previous six months, since that I hadn't copied to a backup on my server because I was prepping to move at the time).

So far, OTBR is the biggest stopping issue since HA runs it but nothing sticks. I admit, moving zwave is my actual biggest dread; zigbees I can do probably in a weekend, but zwave is such hell to unpair and re-pair (thought it makes up for it by sticking forever). That's part of the reason I love Thread and Matter; they're almost as sticky as zwave once they pair, and while pairing them is variable (sometimes fast, sometimes not so much) they repair themselves pretty consistently if the outage is under 24 hours and you can deliberately unpair them fairly easily.