this post was submitted on 04 Feb 2025
171 points (99.4% liked)

RetroGaming

20283 readers
331 users here now

Vintage gaming community.

Rules:

  1. Be kind.
  2. No spam or soliciting for money.
  3. No racism or other bigotry allowed.
  4. Obviously nothing illegal.

If you see these please report them.

founded 2 years ago
MODERATORS
Xylinna@lemmy.world
Tenthrow@lemmy.world
gts@lemmy.world
171
Run Your PS2 Library from a $50 Memory Card Effortlessly (www.retronews.com)
submitted 1 day ago by Kain1@lemmy.world to c/retrogaming@lemmy.world
32 comments fedilink hide all child comments
 

A new innovation in the retro gaming community now allows you to run your entire PS2 library directly from a $50 memory card, thanks to the Multi-Purpose Memory Card Emulation (MMCE) protocol.

you are viewing a single comment's thread
view the rest of the comments
[–] Redkey@programming.dev 1 points 20 hours ago

I have a 2TB SATA HDD in my PS2 fat. AFAIK that's still the maximum storage size possible with the FMCB/wLaunchELF software. I believe that an unmodded original network adapter should be able to take up to a 512MB IDE drive, but I'd have to double-check that.

I used to use a third-party "network adapter" (they usually don't have Ethernet, just an HDD connector) with SATA support, which still works fine (it seems like most brands stopped working properly after a certain homebrew software version), but later I bought an official adapter (IDE/PATA) and a SATA conversion kit (a kit specific to the PS2 network adapter, not a standard IDE-SATA converter, which sometimes work with the PS2 and sometimes don't) so I could try network stuff.

I don't think it was worth it, but these days it's probably the way to go since there no longer seems to be any way of telling the non-working aftermarket adaptors from the working ones; the companies making the bad ones just started putting the brand name of the one still working adapter on their products.