This is mostly just for discussion, but this is my PC's current state. I do want to do a full custom watercooled setup sometime but I'm wondering if anything is screaming out "upgrade me, I'm old". I mostly game and do CAD design/3D printing. Some photoshop and After Effects work every now and then. What would you upgrade?
Oh, if there's a r/buildapc type community I should post this in, then please let me know. Thanks!
Oh, awesome, thanks for that! I was looking at the 5800x3d, but it looks like a downgrade to me. Am I missing something? Is the single stacked L3 cache that big of an improvement still even with less cores and lower clock speed?
Man, thanks for the detailed post! I'll definitely have to look more into how I'm using my PC nowadays. I still game, but I jump back and forth between the PC and the PS5 a lot. Most of my time is spent in Fusion 360 designing for 3D printing. So I'm not sure about the 5800x3d, but maybe upgrading to a newer generation Ryzen could be in the cards. Either way, I don't want to rush into anything just yet, but you've definitely given me something to think about. Much appreciated!
I'm not sure what you mean by this. CAD and 3D printing are two separate processes. You make a design in CAD and then bring that file into 3D printing software (known as a slicer), which converts the model file into a gcode file (basically a list of instructions that the printer interprets for printing) that is given to the printer. The 3D printing part is mostly handled by the printer itself. Slicing the model file is the only part done on the computer. You can also just download files to print and never even use a computer if you don't want to design yourself.
I sometimes download premade files to print, but more often that not I make designs myself in CAD, which I then print. But yes, you are correct in that the 3D printing part isn't memory intensive. But I do a lot of CAD design, which is.
The 3D printing part isn't as it doesn't really involve a computer if you don't want to. But if you do CAD design, then yes obviously. The 3D printing slicer software is still 3D software, but you can't do as much as a full blown CAD program.
I use Fusion 360 for CAD design, which uses multiple cores.