[Help request] [Solved] Hardware clock not resetting (sopuli.xyz)

submitted 7 months ago* (last edited 5 months ago) by qyron@sopuli.xyz to c/hardware@lemmy.ml

4 comments fedilink hide all child comments

My computer recently developed an error where the hardware clock displays the time as follows

System date [Mon 31/63/25755]
System time [63:28:25]

The clock runs.

I've tried all the usual tactics: remove CMOS battery, short the pins to force a reset, put fresh battery, reflash BIOS. Nothing.

On boot, I get an error on reading the hardware clock and the system defaults to 3 of September, 2025.

I think I'm looking at a mobo heading to the e-waste bin.

The board in question is a GygaByte AB350M-DASH. It still runs but it's a bit annoying having to set the system clock every single time I boot up the machine.

Any advice on the matter is welcome.

you are viewing a single comment's thread
view the rest of the comments

[-] emotional_soup_88@programming.dev 2 points 7 months ago* (last edited 7 months ago)

I second this. If you can deal with those microconnections to an NTP server, search for how to enable NTP. On a systemd Linux system it should be a timedatectl option, I think.

this post was submitted on 17 Jan 2026

6 points (100.0% liked)

Hardware

6035 readers

1 users here now

This is a community dedicated to the hardware aspect of technology, from PC parts, to gadgets, to servers, to industrial control equipment, to semiconductors.

Rules:

Posts must be relevant to electronic hardware
No NSFW content
No hate speech, bigotry, etc

founded 6 years ago

MODERATORS

AgreeableLandscape@lemmy.ml