this post was submitted on 28 Aug 2023
11 points (100.0% liked)

Pathfinder 2e General Discussion

4 readers
1 users here now

founded 2 years ago
MODERATORS
 

A level 5 rogue will quite probably have a thievery dc of 13, if they invest in it and max dex. The average lock has a dc of 25 and requires 4 successes. It takes a roll of 12 or better to have a single success, and will average about 9 rolls to rack up those 4 successes. With 9 rolls wherein you crit fail on a 2 or lower, the likelihood of breaking a pick is ~61%.

Should a level 5 rogue take a minute to open the average lock, and more likely than not break a pick in the process?

And let's look at a good Lock: DC 30, requiring 5 successes. The level 5 rogue will only succeed on a 17, meaning it will take on average 20 attempts to get those 5 successes. On one attempt in a thousand our Lvl 5 rogue will open this lock before breaking a pick, and will typically break 3 in the process.

Am I missing something?

you are viewing a single comment's thread
view the rest of the comments
[–] tempestuousknave@ttrpg.network 2 points 1 year ago (2 children)

It's a pretty realistic expectation for a mediocre locksmith in the real world faced with the average door lock. It's a bit slow for the fantasy expert lock picking thief who's invested their ability and skill increases to excel at a mundane and achievable task. But time spent is the smaller issue.

And it's 3 gp a thieves tool set, but the bigger issue is bulk. God forbid you've a dozen doors with good locks in a dungeon, that's 4 bulk worth of picks to get through--pretty much the thiefs whole inventory--and a 50 percent chance of ultimate failure (not to mention 240d20). Pretty rough on the class fantasy. If nothing else I'd change the names of the locks to pad the thief ego: poor becomes average, average good, good master and master legendary. I don't want my player stymied by an average door because he only brought one backup toolkit.

[–] Merwyn@sh.itjust.works 2 points 1 year ago

Thieve tools are 3Gp but replacement picks are 3sp. Also, the tools are light bulks, and the replacement pick don't even list a bulk.

[–] KoboldCoterie@pawb.social 1 points 1 year ago

Merwyn already pointed out that replacement picks are cheap and weightless. Regarding the number of dice, every PF2 campaign I've been a part of (which is two, so a pretty small sample size) has just had the rogue roll for each tumbler right up front. Need 5 successes, roll 5 dice. If any of them are a critical success, it offsets a critical failure (in addition to counting for two tumblers as normal); otherwise, each critical failure = -1 replacement pick. It's meant on average 2-3 sets of rolls per lock, rather than 7-8, and keeps things moving at a fine clip.