33
submitted 5 months ago* (last edited 5 months ago) by KurtVonnegut@mander.xyz to c/diy@slrpnk.net

Hi all, I found this old ThinkPad and I would like to pass it on to someone that could really use it, but it's a bit disgusting. What is the best and easiest way to clean this? What tool would/ do you use?

you are viewing a single comment's thread
view the rest of the comments
[-] gressen@lemmy.zip 5 points 5 months ago* (last edited 5 months ago)

Also the plastic parts of the vacuum cleaner tend to build up static charge when rubbed, so be careful not to zap your electronics.

[-] hendrik@palaver.p3x.de 4 points 5 months ago* (last edited 5 months ago)

Yes. Thx, I forgot about that. Especially the insides. You probably want to have a look inside, if the outside already looks that dirty. And the case / outside is probably fine with some light zapping. It went through ESD testing and certification. And should be able to deal with electrostatic discharge in some way. But the (individual) components on the inside are way more delicate and not made to withstand it.

[-] MalReynolds@slrpnk.net 4 points 5 months ago* (last edited 5 months ago)

And avoid fans, spin them fast and they're generators, with a good chance of reverse polarity to the intended. In fact, judicious canned air is probably better than a vacuum, but you use what you've got, it's a thinkpad, it'll probably be fine.

+1 to Isopropanol, (unused) makeup brushes can also be useful.

[-] foxymochakitten@slrpnk.net 2 points 5 months ago

seconding makeup brushes!! Fluffy ones are great for delicate things and lightweight dust but a good thin edge brush will work wonders on stuck bits (source: my sewing machine seems to inhale dog hair every chance it gets)

this post was submitted on 13 Apr 2026
33 points (97.1% liked)

DIY

4522 readers
1 users here now

Share your self-made stuff and half-baked projects here.

Also check out !diy@beehaw.org

There is also a related XMPP chat.

founded 4 years ago
MODERATORS