homeassistant

20314 readers

4 users here now

Home Assistant is open source home automation that puts local control and privacy first.
Powered by a worldwide community of tinkerers and DIY enthusiasts.

Home Assistant can be self-installed on ProxMox, Raspberry Pi, or even purchased pre-installed: Home Assistant: Installation

Discussion of Home-Assistant adjacent topics is absolutely fine, within reason.
If you're not sure, DM @GreatAlbatross@feddit.uk

founded 3 years ago

MODERATORS

GreatAlbatross@feddit.uk

greatalbatross@lemmy.world

Disappointed with Aqara - Zigbee hub, but no 3rd party? (sh.itjust.works)

submitted 4 months ago by CocaineShrimp@sh.itjust.works to c/homeassistant@lemmy.world

28 comments fedilink hide all child comments

Correct me if I'm wrong, but...

Buyer Beware! Aqara hubs use the Zigbee protocol, but lock out 3rd party devices!

A few months ago, I bought an Aqara hub and went deep into their ecosystem. I saw their hub and sensors had good reviews, plus they were using the Zigbee open protocol, so I figured I'd stick with their stuff. I had no reason to try other devices until recently.

I picked up a tilt sensor for my garage door from a 3rd party. I made sure it was also using the Zigbee protocol, so I assumed it would be compatable. Unfortunately, when I tried connecting it to the hub, I was wrong and it wouldn't connect. Turns out, Aqara uses the Zigbee protocol, but locks out 3rd party devices. [source]

If anyone has a workaround to integrate a 3rd party device with an Aqara Hub (IIRC, I have the M3?), I'd love to hear about it. But until then - I'm looking for a refund. I would have never picked up their hub if I had known about their shennanigans; and consequently, I wouldn't have picked up so many of their sensors.

you are viewing a single comment's thread
view the rest of the comments

[–] CanIFishHere@lemmy.ca 1 points 4 months ago (1 children)

If you're running HA, you don't need an Aqara hub at all. Just add them to your Zigbee integration. ZHA or Z2M. No third party hub required.

[–] fonix232@fedia.io 1 points 2 months ago (1 children)

Hub not required but a ZigBee adapter is.

[–] CanIFishHere@lemmy.ca 1 points 2 months ago

Which are always vendor agnostic.