12
submitted 4 months ago* (last edited 4 months ago) by pglpm@lemmy.ca to c/i2p@lemmy.world

I installed I2P on a Linux laptop. For the moment I'd prefer not to have I2P to start automatically as system service. The installation guide says that after installation I can simply run i2prouter start, which starts the service and opens the router console on my browser; I've configured the router.

Question 1: what's the best way to shut down router and service, when I need to? The guide above says I can use the command i2prouter stop; but I also see buttons on the browser console and on the tray on the taskbar.

Question 2: I've also noticed that sometimes after i2prouter start I get asked again to configure the router. How do I make sure the configuration is saved once and for all?

Unfortunately I didn't find anything about these specific points in guides or FAQs.

Thanks for helping!

you are viewing a single comment's thread
view the rest of the comments
[-] pglpm@lemmy.ca 5 points 4 months ago

Thank you for the information and advice. I'll set aside 15 min for shutting it down gracefully then.

[-] WhyJiffie@sh.itjust.works 2 points 4 months ago

oh and one more thing. if you run it in docker, it won't receive the system shutdown signal. on your setup you probably don't have this problem, buy you can check on the web interface if it is shutting down

[-] pglpm@lemmy.ca 1 points 4 months ago

Thanks for the additional tip! Not using docker at the moment, but I'll keep this in mind if I do :)

this post was submitted on 18 Apr 2026
12 points (92.9% liked)

The Invisible Internet Project

1994 readers
1 users here now

I2P Community Edition

This isn't the official I2P channel, if you want go there then you can find it in the links below.

Rules

"Don't be a dick" - Wil Wheaton

General

Media:

File Hosting and Pastebins

Torrents

Social Networks and Microblogging

Exploring I2P

I2P Name Registries

Search engines

IRC

Irc2P comes pre-configured with I2P. To connect with other networks, please follow this tutorial.

Syndie

An open source system for operating distributed forums in anonymous networks

Inproxies

You can use inproxies to surf the I2P network without having to have an I2P router.

Follow us on Twitter

founded 3 years ago
MODERATORS