Hardware

5993 readers

3 users here now

This is a community dedicated to the hardware aspect of technology, from PC parts, to gadgets, to servers, to industrial control equipment, to semiconductors.

Rules:

Posts must be relevant to electronic hardware
No NSFW content
No hate speech, bigotry, etc

founded 6 years ago

MODERATORS

AgreeableLandscape@lemmy.ml

Is this Raspberry Pi 5 damage fixable? How do you guys find good repair shops? (lemmy.nz)

submitted 3 months ago by ell1e@leminal.space to c/hardware@lemmy.ml

5 comments fedilink hide all child comments

(Sorry if I'm posting this in the wrong community!)

A Raspberry Pi 5 I use (not the one in the photo) fell off the table, and the black square component pointed at by the arrow was straight knocked off the board. Yeah, if you needed a reason why you should always use a case, this is one, ooops lol...

It looks like it came off cleanly, leaving two square metal pads below. I still have the component, the small black box. This happened while the Raspberry Pi was running, and the power LED went from green to red in an instant. Afterward, booting was no longer possible. So, my questions:

If this happened while it was running, is it likely that this fried something else and it's not worth getting fixed? Or is this likely fixable?
If I want to get this fixed, how do you guys find a good local repair shop? I heard some apparently do sloppy soldering jobs, and given the RAM prices I would like not to have this Raspberry Pi unnecessarily damaged further if it's salvageable. I live in Freiburg im Breisgau in Germany, if anybody knows good local places.

you are viewing a single comment's thread
view the rest of the comments

[–] ell1e@leminal.space 1 points 2 months ago* (last edited 2 months ago) (1 children)

Thanks! So do you have any suggestions on how to find a good one? Something like Google reviews, or what other approach do people use? I don't care for super cheapest.

I'm also now wondering if the component that fell off had a fixed orientation (since it would fit in two angles, if you rotate it 180 degrees horizontally it sits on top just the same) and whether the shop would need to be told by me...

[–] WhiteRice@lemmy.ml 1 points 2 months ago (1 children)

Yea, google and then call to see if they do pcb work.

Components and the pcb usually have polarity denoted. Failing that a pcb schematic will have the information.

[–] ell1e@leminal.space 1 points 1 month ago* (last edited 1 month ago)

I wonder, where would I typically find the schematic? This piece is so small that nothing is printed on it. It has two metal contacts that look perfectly symmetrical on each side, so there are two orientations it could go in.