28
submitted 3 months ago* (last edited 3 months ago) by casey@lemmy.world to c/diy@lemmy.ml

My two year old stepped on my glasses while at a picnic. I wear these daily and it's hard to find a suitable replacement.

Frames are plastic . Lenses are plastic and not prescribed. These were about $20 (us) and the brand is from a fishing line of equipment called Ugly Stick.

I have tried to find this exact kind again online and have not been able to find them. I have another pair that is adjacent to these but they look differently because of the colors and the lenses are a different tint.

I would love some advice on how to fix the plastic frame so that it will be sturdy again.

I'm not sure what other information I can provide about the glasses or what questions I am failing to head off, so please ask away.

Thanks in advance.

you are viewing a single comment's thread
view the rest of the comments
[-] Courantdair@jlai.lu 8 points 3 months ago* (last edited 3 months ago)

I have the exact same problem, I'm planning to try a small drop of super glue on the breach and make it dry upside down to limit lens damage... I'm sure it won't be as sturdy as before though

[-] CameronDev@programming.dev 8 points 3 months ago

It may actually end up stronger, I fixed a friends glasses with superglue, next time she sat on them it broke in a different place.

Superglue is pretty strong stuff.

[-] adespoton@lemmy.ca 7 points 3 months ago

The thing to be careful of is to use a small enough amount… you need less than you think, and don’t want it bleeding out.

[-] Junkers_Klunker@feddit.dk 5 points 3 months ago

Yea with superglue, less is more.

[-] SaveTheTuaHawk@lemmy.ca 0 points 3 months ago

Superglue should be used with activator spray. I've never had super glue alone really fix anything.

[-] haverholm@kbin.earth 4 points 3 months ago

Could try the old superglue-with-baking-soda trick. I've had people recommend it to fix moveable parts in stereo equipment, apparently it turns hard as concrete.

[-] yuman@programming.dev 3 points 3 months ago

this here.

the bond will be stronger than cement, it will break anywhere else but there again; will look like shit, though.

[-] haverholm@kbin.earth 0 points 3 months ago

Oh, with a bit of sanding and polishing... 🙂 Is it worth your time and effort? Depends how much you like your sunglasses!

[-] AddLemmus@lemmy.ml 1 points 3 months ago

I had the exact same problem and tried that first, but it did not work in my case: There was a strong pull on it, and the surfaces did not fit perfectly.

If the surfaces fit perfectly, OP can try. Superglue (most / some types) can be removed later from the glasses, but of course, no harm avoiding that in the first place.

this post was submitted on 31 May 2026
28 points (93.8% liked)

Do-It-Yourself, Repairs and Fixes

3459 readers
3 users here now

Share tips and tricks to keep people from throwing out that broken item. Repair before replace!

founded 7 years ago
MODERATORS