techsupport

3191 readers

19 users here now

The Lemmy community will help you with your tech problems and questions about anything here. Do not be shy, we will try to help you.

If something works or if you find a solution to your problem let us know it will be greatly apreciated.

Rules: instance rules + stay on topic

Partnered communities:

You Should Know

Software gore

Recommendations

founded 3 years ago

MODERATORS

GatoB@lemmy.world

any good guides on how to cut, strip, crimp and test DIY Ethernet cables? (piefed.blahaj.zone)

submitted 1 week ago* (last edited 6 days ago) by akunohana@piefed.blahaj.zone to c/techsupport@lemmy.world

20 comments fedilink hide all child comments

Update: thank you all for your detailed and kind input! I finally tried crimping on an 8P8C connector onto an Ethernet cable. I failed. Miserably. But at least I finally learned what's actually happening - or what's supposed to happen: the teeth of the connector actually puncture the individual wires in order to make contact with the conductors inside. Sic. But omg is it a game of patience. 🤣

I actually just want to shorten one that I'm already using. 😊

you are viewing a single comment's thread
view the rest of the comments

[–] Bustedknuckles@lemmy.world 2 points 1 week ago

It's just a special type of connector plug that lets the wires slide through if you want to see the wires come out the front. I just used clear connectors to check the color ordering