DIY

4400 readers

14 users here now

Share your self-made stuff and half-baked projects here.

Also check out !diy@beehaw.org

There is also a related XMPP chat.

founded 4 years ago

MODERATORS

poVoq@slrpnk.net

livligkinkajou@slrpnk.net

105

Any tips on plastic adhesives? Trying to repair headphones (lemmy.nz)

submitted 5 days ago by punksnotdead@slrpnk.net to c/diy@slrpnk.net

86 comments fedilink hide all child comments

Hi DIY!

My headphones of many years recently broke. My first response was to attempt to glue them back together with super glue (ethyl 2-cyanoacrylate) however that didn't seem to hold. Not even a little bit.

I then did a bit of searching and found that Sony often use ABS plastic in headphone manufacture, so presumably these are ABS. I then read super glue should work okay on ABS, however there seemed to be no bonding happening at all.

Do any of you have any tips for the best kind of glue or epoxy to bond these plastic parts back together and get the music flowing again?

I plan on wrapping the joints in thread afterwards, for additional durability. But first I need to get them bonded.

you are viewing a single comment's thread
view the rest of the comments

[–] burgleyerturts@lemmy.world 6 points 5 days ago (1 children)

Try layering several times with super glue and tissue paper.

[–] punksnotdead@slrpnk.net 3 points 5 days ago

Oh I've never heard of that method before! I'll keep it in my back pocket as a last resort if all else fails, thank you