DIY

4400 readers

17 users here now

Share your self-made stuff and half-baked projects here.

Also check out !diy@beehaw.org

There is also a related XMPP chat.

founded 4 years ago

MODERATORS

poVoq@slrpnk.net

livligkinkajou@slrpnk.net

105

Any tips on plastic adhesives? Trying to repair headphones (lemmy.nz)

submitted 6 days ago by punksnotdead@slrpnk.net to c/diy@slrpnk.net

86 comments fedilink hide all child comments

Hi DIY!

My headphones of many years recently broke. My first response was to attempt to glue them back together with super glue (ethyl 2-cyanoacrylate) however that didn't seem to hold. Not even a little bit.

I then did a bit of searching and found that Sony often use ABS plastic in headphone manufacture, so presumably these are ABS. I then read super glue should work okay on ABS, however there seemed to be no bonding happening at all.

Do any of you have any tips for the best kind of glue or epoxy to bond these plastic parts back together and get the music flowing again?

I plan on wrapping the joints in thread afterwards, for additional durability. But first I need to get them bonded.

you are viewing a single comment's thread
view the rest of the comments

[–] grue@lemmy.world 4 points 6 days ago* (last edited 6 days ago) (1 children)

If you're trying to be true to the "solarpunk ethos," do you really think this is the last repair you'll ever do?

I, for one, have never regretted letting a 'one time' project be an excuse to get a new type of tool.

(Just don't get the disposable UV light another reply mentioned; that really is a bit wasteful. If you decide to go the UV glue route, get an inexpensive but proper standalone UV flashlight.)

[–] HerbGrower@slrpnk.net 3 points 6 days ago

Depends on the tool and its cost for me. If its something I can realistically see using again and is a reasonable price then sure.