10
Analyzing USB
(lemmy.world)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 06 Sep 2026
10 points (91.7% liked)
Electrical and Computer Engineering
3076 readers
2 users here now
Electrical and computer engineering (ECE) community, for professionals and learners. Discuss ECE related topics here, for instance digital design, signal processing, circuit analysis, electromagnetics, microelectronics, power electronics, RF electronics, etc.
founded 3 years ago
MODERATORS
I have the same scope, but it doesn’t have USB decode. I watched the video and he’s initially doing the decoding very manually. Fun, but not something you’re going to want to do when someone’s paying for your time.
He later switches to a Keysight DSO-X 4024A. It costs a fair bit more. :)
Been doing some digging now knowing about logic analyzers and I found that RIGOL has some oscilloscopes with digital channels that are within my budget range (needs the RPL1116 probe to function). Though they're bandwidth is 100MHz for the one's I could find that are under 500-1,000$. Would this be enough at least for USB 2.0?
Does it have built-in USB decoding? If not then it’s not very practical tbh, but it could do low speed and full speed, with manual decoding. Not high speed.
OpenVizsla can do high speed: https://shop.sysmocom.de/USB-Tracing/
What are you after though? A scope is more fun. :)
I'm trying to learn electrical circuit design and programming and want/need an oscilloscope for obvious reasons (I already have most of the basic stuff such as a soldering station and a multimeter). I know I want to work with various ICs, FPGAs, and of course stuff like USB to plug stuff. Though budget isn't that extravagant, I should have decent wiggle room (I suppose totals of below or around 700$ is fairly manageable at the moment).