70
Can you run multiple servers on one machine (e.g. Raspberry Pi)?
(lemmy.dbzer0.com)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 26 Sep 2026
70 points (96.1% liked)
Selfhosted
62657 readers
546 users here now
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.
Rules:
-
Be civil.
-
No spam.
-
Posts are to be related to self-hosting.
-
Don't duplicate the full text of your blog or readme if you're providing a link.
-
Submission headline should match the article title.
-
No trolling.
-
Promotion posts require active participation, with an account that is at least 30 days old. F/LOSS without a paywall has exceptions, with requirements. See the rules link for details. Tags [CBH] or [AIP] are required, see the links in Rule 8 for details.
-
AI-related discussions and AI-involved promotional posts have additional requirements for tagging, as noted in Rule 7 and the AI & Promotional Post Expanded Rules post, and find example disclosures here.
Resources:
- selfh.st Newsletter and index of selfhosted software and apps
- awesome-selfhosted software
- awesome-sysadmin resources
- Self-Hosted Podcast from Jupiter Broadcasting
Any issues on the community? Report it using the report flag.
Questions? DM the mods!
founded 3 years ago
MODERATORS
As other commenters have said yes you can run these depending on the Pi. Do note however if you need transcoding, A Pi is not recommended by jellyfin:
https://jellyfin.org/docs/general/administration/hardware-selection#potentially-problematic-hardware
What is good enough fr transcoding? I have plex for travel, I want to move to jellyfin and get an arr stack all on one system. Looking at a 9th gen i5 thinkcentre with 16gb ram
Official Recommendations for low power: Intel 12th gen or above N series platforms Apple M Series Mac mini Rockchip RK3588 / RK3588S SBC (Advanced Users Only)
Note 10th gen and older integrated graphics are losing support in Linux due to Intel dropping SDK support or something. Don't buy a nuc or small PC with Intel 10 or older but if you have one it's fine for now.
Another option would be an old laptop with dedicated graphics (e.g. e waste/recyclers). then you can get away with older than 10gen Intel since you'd be using the external graphics. Just research how to limit battery charging in the bios since it's always going to be plugged in.
I am looking at a few N100 mini pcs, is there an AMD alternative?
I keep seeing nearly good enough specs but the chip is not low power generation
it's not recommended. AMD graphics in general have poor h.264 encoding: Encoder Quality: NVIDIA (RTX 50) ≥ Intel (Arc-B) ≥ Apple ≥ Intel ≥ NVIDIA ≥ AMD ≥ AMD H.264 (RX 9000) >>> AMD H.264*
Very good, I think I am going to go with a 16gb N100 lenovo all in one. Seems neatest.
Could I get your advice here on the below specs, I just came across it at a reasonable price for that much RAM. I would expect over a grand.
Intel Core Ultra 5 225H 64 GB DDR5 RAM 2 TB PCIe Gen 4 SSD
Based on those specs it sounds like it's going to be more than capable in a homelab environment. If you're streaming to ~5+ devices at the same time id assume it may start to struggle if it's transcoding all of those so if you can pick or convert your media to something that doesn't need transcoding that would be ideal.
but that looks like a solid buy. For reference I run on an old office potato and an external GPU from 2013 that I picked up for nothing a few years ago and have no problems. eventually I'll have to upgrade when the drivers stop being supported but until then 2-3 streams max is fine for me.
I'll be honest, I went looking based on your comment and found something thatnis either way under priced or very misleadingly titled. I have ordered it to check which.
It was 400 euro for that mini pc. I would probably move everything to it if it is real.