87
submitted 21 hours ago* (last edited 21 hours ago) by papalonian@lemmy.world to c/retrogaming@lemmy.world

Hey everyone, I've been playing Guitar Hero since the first one came out, and have an Xbox 360 that is kept alive so I can continue doing so. The guitar controller I have that's in best condition has had issues with the green fret button for years now. When I went to play just now, it took several attempts just to launch the game from the Xbox home screen, so I finally decided to take things apart and look at it, however I think the fix I found can be accomplished without disassembling anything (though it requires basic soldering knowledge, and taking apart the neck of the guitar is very easy and will give you more room).

Guitar neck contact points

On the left is what the little contactor board originally looked like; note the divots in the center of each pad where the spring-loaded pins on the body of the guitar press against. The right one is the one that I experimented on, you can just barely make out the divots left in the bead of solder I put on each contactor. The contact pads seem to be too thin for how strong the springs for the pins are; a little solder gives the pins a fresh surface to make a good connection, and much more material to push through (even if the pin does wear all the way through, there will be enough solder surrounding it to make a good connection).

After ~2 hours of playing just now, no issues on any of the fret buttons!

Hope this helps someone! Rock on! 🤘🏾

you are viewing a single comment's thread
view the rest of the comments
[-] Devadander@lemmy.world 11 points 20 hours ago

Love this. If I could find a working damn Xbox 360 I’d love this more. Tried replacing the laser on mine but it didn’t seem to fix the issue loading the disc mine has. Won’t read any game to load it

[-] Pupschism@lemmy.world 1 points 1 hour ago

If it's just the lazer maybe this would work https://www.youtube.com/watch?v=LUkQzOGZBa4

[-] potatobro@lemmy.blahaj.zone 7 points 16 hours ago

Xbox 360 guitar hero controllers work perfectly with Clone Hero on PC, if you got a controller I highly recommend giving it a shot

[-] papalonian@lemmy.world 4 points 19 hours ago* (last edited 19 hours ago)

That's too bad. It really was a fantastic console; it's the last one I ever bought new, besides the 3DS.

When you say it doesn't read disks, does it recognize the game title but fail to launch? Or it doesn't see the game at all? If it's the former, you may be able to find someone who has a working 360, put your hard drive in their system, "install" the game data to the hard drive, then put your hard drive back in your system.

this post was submitted on 27 Sep 2026
87 points (100.0% liked)

RetroGaming

30168 readers
578 users here now

Vintage gaming community.

Rules:

  1. Be kind.
  2. No spam, AI slop, or soliciting for money.
  3. No racism or other bigotry allowed.
  4. Obviously nothing illegal.

If you see these please report them.

founded 3 years ago
MODERATORS