Advice needed for dualboot x86_64 on an already partitioned drive (lemmy.nz)

submitted 2 days ago by Mumuskeh@lemmy.ml to c/nura@lemmy.world

6 comments fedilink hide all child comments

cross-posted from: https://lemmy.ml/post/53368173

Hello lemmy and Nura :D.

First time being around these parts of the web. I am a MX Linux daily driver and would like to dualboot with Nura on PC. I already exported my pmbootstrap'd split images and installed them to the last 2 partitions of my SSD with Gnome Disks (idk if it counts as flashing, pls view the attached image).

Updating grub with # update-grub seemed to work, it printed pmOS being found at sda7, but trying to boot off that gets stuck. I tried talking to a LLM to solve the issue, and my conclusion is that neither does it know well enough about pmOS/Nura - I rather not waste my time in it's hallucination, and also the way I try to setup Nura is probably not documented anywhere (or maybe I suck at reading wiki). For short, It has made me aware that os-prober does not know what to do with Nura, and that manually writing Nura to grub configs is the way.

Need a hand with that, please... thanks.

you are viewing a single comment's thread
view the rest of the comments

[-] Mumuskeh@lemmy.ml 1 points 1 day ago

Bellow all my entries there lies:

postmarketOS v26 (can't remember full name)
advanced settings for postmarketOS v26
- postmarketOS v26
- postmarketOS v26 (yes it's 2 identical in this menu)

And again, I will mention that these entries were automatically generated by # update-grub.

Nothing else to the left side of partition 7 & 8 (pmOS boot & root) matters, except EFI, since well it's the EFI partition. I want to boot pmOS through GRUB. The other boot partition is for my main OS.

[-] INeedMana@piefed.zip 1 points 19 hours ago

Uh, sorry, I meant the actual contents of the grub config (most probably (pmOS boot)/grub.cfg. The one with stuff like vmlinuz and initrd

To me it looks like there's some problem with running the init. I'd guess either the partition reference, path or maybe just some empty something. But that's all I can guess without the contents of the config

Just for your info - you could be running from shared boot partition. Just make sure one OS doesn't overwrite the kernel and initramd of the other. It's not a problem, just a piece of info

[-] Mumuskeh@lemmy.ml 1 points 7 hours ago

Ah, no problem! So there is nothing related to grub at all in pmOS_boot... However the system is boot-able through UEFI entries! I don't know why I didn't try that earlier.

My workstation's BIOS is all fancy and let's you add custom entries, but it was easier to use MX's UEFI manager. I simply added a new entry to pmOS's BOOTX64.EFI. I still would like to boot it through my GRUB.

Also thanks for the piece of info and all the interest in helping me so far :)

[-] Mumuskeh@lemmy.ml 1 points 7 hours ago* (last edited 7 hours ago)

Actually, here's the grub menu from MX, where pmOS entry was auto-generated.

EDIT: corrected accidental duplication when pasting the config

[-] INeedMana@piefed.zip 1 points 4 hours ago* (last edited 3 hours ago)

Ok, just to confirm I understand correctly:

after power up you don't choose different UEFI entry, just wait for the regular (sda2) grub to come up. Same as when booting up MX
you choose the option postmarketOS v26.06 (on /dev/sda7)
then you get the error from the earlier photo?

If all of that is correct, then:

it seems that some kernel starts fine and it's even Alpine. It's either reading the root partition or running the init that breaks
you went with SysV or Systemd?
- that ahci0,gpt6 6969-ACCE seems weird, though
  What are the UUIDs of your partitions?
- looking at other example of rdinit -2, nothing else appears on the screen after the point you made picture of?
the kernel you want to run is on sda6 and is named vmlinuz-lts?
there is no initrd file in sda6?
I'm not sure if using /dev/sda7 isn't too early
for a test replace dev/sda7 in line 249 with (hd0,gpt7)
Ideally it should be partition's UUID like in the earlier entries but without the UUIDs from earlier point I don't know the string to pass to you
your sda6 is FAT, while sda7 is EXT. What happens if you add insmod ext2 after line 242?

this post was submitted on 30 Sep 2026

8 points (100.0% liked)

Nura

132 readers

32 users here now

Nura - The Linux distribution for mobile devices and beyond. 🐧 📱 👩‍💻

Rules:

Be nice, follow CoC
Don’t ask for device ports, consider DIY
Report bugs in the issue tracker (not here! 🐛)