631
Anon is a carpenter
(lemmy.nz)
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
this post was submitted on 09 Nov 2026
631 points (97.6% liked)
Greentext
8989 readers
558 users here now
This is a place to share greentexts and witness the confounding life of Anon. If you're new to the Greentext community, think of it as a sort of zoo with Anon as the main attraction.
Be warned:
- Anon is often crazy.
- Anon is often depressed.
- Anon frequently shares thoughts that are immature, offensive, or incomprehensible.
If you find yourself getting angry (or god forbid, agreeing) with something Anon has said, you might be doing it wrong.
founded 3 years ago
MODERATORS
Making stairs is one of the most skillful jobs from a carpenters point of view. At least do said my grandad, who was a carpenter (he made stairs).
I built a two story garage and sought advice from a carpenter friend. He said the same thing then told me a story about he was hired to fix a set of stairs and while initially looking at the job tripped on a stair then ripped off a fingernail catching himself on the handrail. Stairs need to be predictable and consistent. We walk them every day without thinking about it
Making stairs that support people.
I mean, I could knock together something resembling stairs, but no-one should walk up them.
Building a set of stringers is stupid easy though. The only difficult thing is doing the math to figure out the tread depth and riser height to meet code in the space you have.
The tricky part, I am told, is ensuring every step is the same height
Here's a video of a subway staircase where one step is slightly higher than the rest. Everyone trips.
where's the fun in that? Make the last step a little bit shorter or higher!
They do this in some castles to trip up the invaders
Not invaders but assassins. The people who belong to the castle will be used to the stairs. Any outside intruders will stumble about and therefore be heard.
"stumble steps"
also "trip steps"
That's a subtle ingenious trap.
Funny story: I built the staircase heading up to my loft, and spent days sourcing the perfect planks for the risers so I'd have exactly 13 steps.
Forgot to account for the loft's floorboards and beams, now I have a 13.25-step staircase.
Wait, isn't that just a hallway? Don't you want each step to be a higher height than the previous one?
They mean making sure each step is the same height above the previous. Like if your first step is 7” high, then all steps should be 7”. Not a 7” step, then a 10” step, then a 5” step, etc.
There’s some math involved to figure out the riser height given a certain distance from the upper landing, and it all depends on how much space you have, what code says for a landing, what the minimum tread depth can be, etc.
Thats what these guys are for:
Somehow Lowe's only has these things in pressure-treated lumber. So I made my own for my stairs in my basement using regular lumber. And then my basement flooded.
Well, yeah. Generally you’d want pressure treated for a basement because they should be resting and fastened directly to the concrete anyway, which would require pressure rated to meet code. Even if your basement didn’t flood, the bottom of the stringer would have rotted away because concrete wicks moisture.
There’s virtually never a time you’d want to use non-pressure treated lumber to build stringers, except above grade transitions. In which case, cutting them yourself is also stupid easy.
Hanging a door is the one that pisses me off. I can build fine furniture, build fine staircases, whatever you need. But hanging a door is a nightmare.
I'm not a carpenter, just a stupid homeowner. Learning how to bend hinges to fix problem doors was life changing. Especially in an older house that has shifted over time.
It's tricky to explain. Fortunately there are videos online that show how it works.
Anyway, I know that's not the same thing as hanging a door. That's much more involved.
Hanging a door is super easy*!
*only pertains to new construction in places where the workers before door installation made sure the rough opening is plumb, level, and square.
Installation in a settled house is often a massive compromise on angle, tilt, placement, and sometimes squareness. When all else fails, bending one or more hinge pins to add friction to the door is the last ditch compromise just to have something kind of work.
I'd say doors are tougher than stairs, at least stairs are stationary. If the floor isn't level where the door is swinging, that bottom gap can be.. Public bathroom worthy.
The house I live in is 4 years old and half the doors don't close right.
I don't bend the hinge pins, I bend the hinge "knuckles". That's probably what you meant.
bending the knuckles is one of several solutions for specific issues, bending the hinge pins is specifically done to keep the door from swinging freely (just in case the wall happens to be leaning enough that the doors own weight would move it). Bending the knuckles slightly adjusts the swing and orientation of the door.
My grandad might be biased, fwiw
It's very easy to make shitty stairs
You underestimate how bad I am at carpentering.