this post was submitted on 30 Sep 2023
267 points (91.6% liked)

Technology

59575 readers
3418 users here now

This is a most excellent place for technology news and articles.

Our Rules

  1. Follow the lemmy.world rules.
  2. Only tech related content.
  3. Be excellent to each another!
  4. Mod approved content bots can post up to 10 articles per day.
  5. Threads asking for personal tech support may be deleted.
  6. Politics threads may be removed.
  7. No memes allowed as posts, OK to post as comments.
  8. Only approved bots from the list below, to ask if your bot can be added please contact us.
  9. Check for duplicates before posting, duplicates may be removed

Approved Bots

founded 1 year ago
MODERATORS
L3s@lemmy.world
L3s@fry.gs
L4s@fry.gs
L4s@lemmy.world
enu@lemmy.world
267
Apple may reduce the performance of the 3nm A17 Pro processor due to massive overheating of the iPhone 15 Pro (gagadget.com)
submitted 1 year ago by L4s@lemmy.world to c/technology@lemmy.world
71 comments fedilink hide all child comments
 

Apple may reduce the performance of the 3nm A17 Pro processor due to massive overheating of the iPhone 15 Pro::The problem of overheating of iPhone 15 Pro and Pro Max smartphones is becoming widespread. It is possible that Apple will be forced to take the unpopular step of reducing the performance of the latest 3nm A17 Pro chip.

you are viewing a single comment's thread
view the rest of the comments
[–] obinice@lemmy.world 25 points 1 year ago* (last edited 1 year ago) (3 children)

At what point do we add active cooling to phones?

I don't mean that as a joke, there are some really interesting systems being developed (which are functional) that are extremely tiny that can move air with no moving parts, they're being developed for exactly this sort of use in electronics.

So, no need for a fan that wears down, creates noise, etc.

The biggest issue would be keeping the air channel free of dust and debris, if they can figure that out, then adding a few millimetres of thickness and a small weight increase in order to accommodate future higher capability processors seems entirely acceptable.

Come to think of it, who's to say the air needs to come from outside the phone? You could have a closed system, with air channels moving throughout the phone's metal chassis, acting a little like a heat pump, to better distribute the heat generated in one spot across the entire phone surface area for dissipation.

Phones already use their chassis for cooling, this would just significantly increase the efficiency with no exterior changes. Hmm....

[–] Acters@lemmy.world 9 points 1 year ago* (last edited 1 year ago)

https://www.froresystems.com/

This sounds promising. Dustproof. I dont think waterproofing the air channel will be necessary. This can be used as a way to create a channel for air to pass through without compromising the waterproof seal for the phone internals. The air channel can be a pass through and offers a big benefit in cooling. If there is blockage or damaged fins(I think they are vibrating fins.), then the phone will get warm and automatically throttle. A repair will not be needed unless you want the full performance. I live in the hot desert, and active cooling would be a dream come true. Every high-end phone gets hot to the touch from using GPS or streaming outside.

Edit: Another note is that most people don't beat up their phones with high-pressure water(dirty or clean). If that was the case, then the phones water seal would suffer or be compromised as they are water resistant to low pressure and may not seal against high pressure.

Thin and flat too!

[–] UsernameIsTooLon@lemmy.world 1 points 1 year ago

We already have. It's called a Nintendo Switch