this post was submitted on 10 Jun 2023
103 points (99.0% liked)

homeassistant

12129 readers
15 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago
MODERATORS
 

I figured we could all share some of the cooler things we've done to get the conversation moving in here.

Here are some of the automations I'm proud of and get the most use out of.

Blinds and Lighting

  • Open and close the blinds (Ikea Fyrtur) according to the light levels outside
  • If a window is open, the blind will only close to 50%, but it will close automatically after the window is closed
  • Turn all lights off when the blinds are opened, and turn lights on in occupied rooms when the blinds are closed
  • Automatically close the blinds in the bedroom and bathroom when the shower is on. Open them after we leave the master suite.

Websites

  • (Selenium) Auto login to Amazon to check on the status of my Kindle daily reading streak and notify me if I forget to read. We must keep the streak intact!
  • Auto categorize new transactions in YouNeedABudget and mark them as approved, as well as pull my net worth into Home Assistant
  • Get my most-listened to tracks and artists from Last.FM and pull those into Home Assistant
  • Notify me if there are documents in my Paperless-NGx server that need to be categorized and filed

Reminders

  • When I walk in the door, announce any outstanding Todoist tasks marked with the @alert label so I know to do it before I sit down. Examples are to change the furnace filter or Venmo my friend for Youtube TV
  • I run OCR on the camera feed from my garage camera to determine whether the bins are in the garage. The bins say Trash and Recycling on top, so I look for those words in the image. If they are in the garage in the evening before trash day, I receive an alert

Media and Torrenting

  • Notify me and display a badge in Home Assistant when there is a pending request in Overseerr
  • (Selenium) Log into my favorite private torrent tracker website from Node-RED to check whether I need to take any actions

HVAC

  • Preheat or pre-cool the house prior to peak electricity pricing going into effect. During peak hours, auto adjust the thermostat to prevent it from running
  • Turn the thermostat off if there are windows open. Automatically restore previous setting (cool or heat) when all windows are closed.
  • Turn the bathroom fan on after the shower is turned off and no one is around. Turn it off after 80 minutes or the humidity in the bathroom is within 10% of the humidity in the bedroom, whichever comes first.

Misc

  • Node-RED monitors the status of my UPSes for my servers. If the battery drops below 50% while the power is out, it initiates graceful shutdowns of my Synology and other servers
  • Auto sort the Home Assistant grocery list upon adding a new item
you are viewing a single comment's thread
view the rest of the comments
[–] OutrageousUmpire@lemmy.world 6 points 1 year ago (2 children)
  • All my lights turn on and off based on motion sensors
  • Through the unofficial community Mila integration, I control my air purifiers based on different circumstances, like whether the house is empty.
  • Collect indoor air quality info from my Airthings to view in Grafana
[–] imaBEES@lemmy.world 3 points 1 year ago (1 children)

Can you speak more to your air purifier automations? do you have them stop running when the house is empty? or run when it's empty?

[–] OutrageousUmpire@lemmy.world 4 points 1 year ago* (last edited 1 year ago) (2 children)

I have them run full blast when we aren’t home. They get quite loud on higher settings so when we are home we usually keep them at a lower setting.

Keeps the cats nervous

[–] imaBEES@lemmy.world 3 points 1 year ago

Ah cool, that makes sense!

[–] derek@social.dssc.io 2 points 1 year ago (1 children)

@OutrageousUmpire
I hadn't heard of the Mila air purifiers, how well does the HACS integration work? I might pick a few of these up! #HomeAssistant

[–] OutrageousUmpire@lemmy.world 2 points 1 year ago (1 children)

The integration works just fine. My only issue with my Milas is that the smart features connect over the cloud. They say they have an update adding Homekit support soon but have been saying that for two years

[–] derek@social.dssc.io 2 points 1 year ago

Ahh got it, I'm trying to avoid any cloud integrations, but these air purifiers look nice. The Dyson one I had never would connect and it was supposed to be local... Of course the fan stopped working after 24 hours anyway so I returned that thing. I'll order one and see how it goes!