Home Improvement

9048 readers

1 users here now

Home Improvement

founded 1 year ago

MODERATORS

nichos@lemmy.world

nieceandtows@lemmy.world

Confound4082@lemmy.ml

nieceandtows@programming.dev

Unclogging a bathroom sink without removing the P-Trap (programming.dev)

submitted 1 year ago by way_of_UwU@programming.dev to c/homeimprovement@lemmy.world

23 comments fedilink hide all child comments

Hi all. Anybody have any tips or tricks on making a bathroom sink drain faster without going through the process of taking it apart, cleaning it, and putting it back together?

Normally when my bathroom sink starts to drain slowly, I remove the P-trap and push all the gunk through the bottom into a bucket using a metal rod. Now that I might be responsible for cleaning out several bathroom sinks, I'm starting to dread this process far more.

Drano works OK and makes the sinks drain a bit faster, but it usually gets bad pretty quickly again. Any tools I should be investing in for minor stoppages like this?

you are viewing a single comment's thread
view the rest of the comments

[–] hondaguy97386@lemmy.fmhy.ml 3 points 1 year ago (1 children)

The cheap plungers you can buy at the dollar store are your friend. They are actually made for sinks, which is why they are flat on the bottom. Toilet plungers are made to fit the bowl.

[–] argentcorvid@midwest.social 2 points 1 year ago (2 children)

To use a plunger on a sink, get a rag wet and cover or plug the vent hole (usually at the top opposite the faucet). Then fill up the sink and plunge away.

[–] hondaguy97386@lemmy.fmhy.ml 2 points 1 year ago

Good call on the wet rag.

[–] CmdrShepard@lemmy.one 1 points 1 year ago

You can also use this same plunger on the shower/tub and also need to block the overflow vent on that. Works great for pushing all the hair and gunk through without disassembling everything.