this post was submitted on 07 Jul 2023
17 points (100.0% liked)

Home Improvement

9048 readers
1 users here now

Home Improvement

founded 1 year ago
MODERATORS
nichos@lemmy.world
nieceandtows@lemmy.world
Confound4082@lemmy.ml
nieceandtows@programming.dev
17
Unclogging a bathroom sink without removing the P-Trap (programming.dev)
submitted 1 year ago by way_of_UwU@programming.dev to c/homeimprovement@lemmy.world
23 comments fedilink hide all child comments
 

Hi all. Anybody have any tips or tricks on making a bathroom sink drain faster without going through the process of taking it apart, cleaning it, and putting it back together?

Normally when my bathroom sink starts to drain slowly, I remove the P-trap and push all the gunk through the bottom into a bucket using a metal rod. Now that I might be responsible for cleaning out several bathroom sinks, I'm starting to dread this process far more.

Drano works OK and makes the sinks drain a bit faster, but it usually gets bad pretty quickly again. Any tools I should be investing in for minor stoppages like this?

you are viewing a single comment's thread
view the rest of the comments
[–] czardestructo@lemmy.world 3 points 1 year ago* (last edited 1 year ago)

I do this but have a short length of hose I put on the output of the vacuum and the end of the hose I glued foam around the edge to make a good seal. I use masking tape on the overflow and blast it. Works every time.