this post was submitted on 07 Jul 2023
17 points (100.0% liked)

Home Improvement

9048 readers
1 users here now

Home Improvement

founded 1 year ago
MODERATORS
 

Hi all. Anybody have any tips or tricks on making a bathroom sink drain faster without going through the process of taking it apart, cleaning it, and putting it back together?

Normally when my bathroom sink starts to drain slowly, I remove the P-trap and push all the gunk through the bottom into a bucket using a metal rod. Now that I might be responsible for cleaning out several bathroom sinks, I'm starting to dread this process far more.

Drano works OK and makes the sinks drain a bit faster, but it usually gets bad pretty quickly again. Any tools I should be investing in for minor stoppages like this?

you are viewing a single comment's thread
view the rest of the comments
[–] pozbo@lemmy.world 3 points 1 year ago* (last edited 1 year ago) (1 children)

When you get your short term answer settled, think of the long-term preventative maintenance.

Every 3 or 4 months, fill the sink to the brim with hot water, and then let it all drain. The heat and pressure will help melt lipid deposits and flush them down the system.

do this with all the sinks nearby as well, drain lines like to restrict and regular flushing can help prevent a lot of headache.

[–] ciferecaNinjo@fedia.io 1 points 1 year ago

I sometimes pour a kettle of boiling water down the kitchen drain to melt the fats. I recall seeing a youtube video of a guy boiling pvc fittings to separate them and reuse them, which caused some concern for my habit of pouring boiling water down. But he had to boil those fittings in a pot for like 30 min with all sides of the fitting getting heat, so I’m not worried.

Budget permitting, it’s best to pour the hot water down ~15-20 min before going to bed, then just before going to bed pour ~50—100ml of enzymes. Enzyme-based maintenence cleaning is most effective when the sludge they will consume is warm. Let the enzymes feast on the nasties all night long.