this post was submitted on 25 Mar 2024
142 points (96.7% liked)
Linux
48330 readers
607 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
you are viewing a single comment's thread
view the rest of the comments
view the rest of the comments
Interesting. I have heard of it but so far I didnt bother since my router is quite versatile.
My biggest fear is that it borks itself and I sit there at 10 pm on movie night without a network or internet to troubleshoot.
If if I chose to use it I would need to have the current router as a fallback either running 24/7 or on a dead man switch.
been running it for years now, no weird sudden stability problems whatsoever.
Some routers have dual partition setup.
Active and backup. When flashing firmware, it is flashed to the backup partition. If the router boots successfully, the newly flashed backup partition becomes active and vice versa. If things screw up, nothing happens.
Thanks for the info. Thats not exactly what I meant. I‘m not afraid of the router itself breaking at installation but freezing for example and not being able to reboot. I usually dont tinker with mission critical stuff.
I know you likely have moved on but it would be interesting to actually figure out the cause. What steps would someone need to take to reproduce the issue?
The same thing can happen to manufacturer firmware. Only you'd have much less capability to troubleshoot, let alone fix it.
True but manufacturers are in big trouble if stuff like this breaks where I live so they are very eager to provide such service and additionally, the brand my router is from is generally considered rather good.
Not USian, I'm guessing?
Exactly.
Gotcha. Very different in the States in this regard.
In a lot of regards that concern QoL, sadly. Have a good one.
Good luck. o/
That's exactly what I do. You can keep your ISP router and hook up your openwrt router to one of its lan ports and have two wifi networks.
If you pick decent hardware eg. Netgear R7800 you won't have issues. I've units of those running OpenWrt at home and a few small offices running for years with a lot of clients and traffic and they're rock solid.
It is not normal for it to just stop working
not at all.
Not at all what?
take a guess
Stable? In my experience OpenWRT is very stable. Can you share the hardware and software you were using?
my hardware configuration on openwrt is very stable too