this post was submitted on 10 Jun 2023
103 points (99.0% liked)

homeassistant

12129 readers
15 users here now

Home Assistant is open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server. Available for free at home-assistant.io

founded 2 years ago
MODERATORS
 

I figured we could all share some of the cooler things we've done to get the conversation moving in here.

Here are some of the automations I'm proud of and get the most use out of.

Blinds and Lighting

  • Open and close the blinds (Ikea Fyrtur) according to the light levels outside
  • If a window is open, the blind will only close to 50%, but it will close automatically after the window is closed
  • Turn all lights off when the blinds are opened, and turn lights on in occupied rooms when the blinds are closed
  • Automatically close the blinds in the bedroom and bathroom when the shower is on. Open them after we leave the master suite.

Websites

  • (Selenium) Auto login to Amazon to check on the status of my Kindle daily reading streak and notify me if I forget to read. We must keep the streak intact!
  • Auto categorize new transactions in YouNeedABudget and mark them as approved, as well as pull my net worth into Home Assistant
  • Get my most-listened to tracks and artists from Last.FM and pull those into Home Assistant
  • Notify me if there are documents in my Paperless-NGx server that need to be categorized and filed

Reminders

  • When I walk in the door, announce any outstanding Todoist tasks marked with the @alert label so I know to do it before I sit down. Examples are to change the furnace filter or Venmo my friend for Youtube TV
  • I run OCR on the camera feed from my garage camera to determine whether the bins are in the garage. The bins say Trash and Recycling on top, so I look for those words in the image. If they are in the garage in the evening before trash day, I receive an alert

Media and Torrenting

  • Notify me and display a badge in Home Assistant when there is a pending request in Overseerr
  • (Selenium) Log into my favorite private torrent tracker website from Node-RED to check whether I need to take any actions

HVAC

  • Preheat or pre-cool the house prior to peak electricity pricing going into effect. During peak hours, auto adjust the thermostat to prevent it from running
  • Turn the thermostat off if there are windows open. Automatically restore previous setting (cool or heat) when all windows are closed.
  • Turn the bathroom fan on after the shower is turned off and no one is around. Turn it off after 80 minutes or the humidity in the bathroom is within 10% of the humidity in the bedroom, whichever comes first.

Misc

  • Node-RED monitors the status of my UPSes for my servers. If the battery drops below 50% while the power is out, it initiates graceful shutdowns of my Synology and other servers
  • Auto sort the Home Assistant grocery list upon adding a new item
you are viewing a single comment's thread
view the rest of the comments
[–] Toribor@corndog.uk 5 points 1 year ago* (last edited 1 year ago) (1 children)

I've been using Home Assistant for a while but I don't have a ton of IoT devices so I don't have a ton of automations set up.

My most useful though is an alert that triggers when my garage door has been open for ten minutes, and then again every ten minutes after until it has been open for an hour when it will automatically close.

Accidentally left the garage door open all night at least twice before this and thankfully nothing happened but the automation has prevented this at least twice as well.

Also gives me peace of mind in case I accidentally open it when I'm away.

[–] derek@5280.city 2 points 1 year ago (1 children)

@Toribor @ilikedatsyuk Same!

Some hacked together sharp ir sensors have worked way better than I expected.
https://github.com/DerekParks/GarageDoorIRSensor

[–] Toribor@corndog.uk 1 points 1 year ago* (last edited 1 year ago)

I built out this GarHAge setup which uses magnetic reed switches for state detection. I've considered that a reed switch getting bumped might get it stuck in a loop of endlessly opening and closing though and tried to care for that possibility in my automations.

Really I just need to get an IP camera for piece of mind when I'm traveling. Even if the state detection is broken I can ensure that it's closed and disable the automation until I can repair it.