1
10
2
37
3
10
submitted 2 months ago by sabreW4K3@lazysoci.al to c/raspberrypi@lemmy.ml
4
7
submitted 2 months ago* (last edited 2 months ago) by daannii@lemmy.world to c/raspberrypi@lemmy.ml

Video of me explaining the project and what I am trying to do. https://www.youtube.com/watch?v=XDXg9e9IdSI

I am looking for anyone with some free time who likes tackling electronics/programing projects to potentially lend me some guidance.

The project is basically turning a USB keyboard into a single button that can be triggered by a cat walking on it. and this button press would trigger a transmitter to send a signal to a plug-in door bell system. A cat door bell.

I made a video explaining my project I am working on because that is a little easier for me to show what I am trying to do.

But here are the main points:

  1. I need to know if the boards I have will work or if I need something else. Or what other components I may need. (y splitter?).

  2. I need help with wiring and programing for this project. I am a novice and this is my first program board project. (I realize this is asking a lot so looking for someone with free time who is bored. I am also willing to barter my skills for yours).

  3. I have considered alternative sensors like motion, microchip scanning, and Bluetooth tags to create a doorbell alert but these are not the best choice for my situation. I am looking to potentially having this doorbell sensor on the porch all year round so durability is also a concern.

  4. I want to find the best sensor type for this job. I believe a silicone keyboard would be perfect as the price is right, it’s waterproof-ish, cats like it, size is perfect and it works in all weather temperatures. I am open to other suggestions but see the video for my review of alternatives and why I don’t think they are the right choice.

Found one like this one on amazon. but on aliexpress its about $10. https://www.amazon.com/Sungwoo-Foldable-Silicone-Keyboard-Waterproof/dp/B06XHBQ4MB

  1. I have some skills with making things. A small amount of experience with programing and a little bit more with electronics though mostly that’s been powering small motors or LEDs directly without boards. -Also I can 3d model and have a 3d printer. I forgot to mention that in the video but I can make any housing for the components.

  2. I am asking quite a lot from a stranger and realize that most people wont have the time or energy to help me with a project that I have only been able to do the bare amount of work on. But I certainly appreciate anyone who can.

Perhaps we can make a trade arrangement of skills. I am decent at 3d design. Perhaps I could help you with something that needs housing or a case. I could design something to be 3d printed. I am a crafty person and know how to do a lot of things including leather repair, zipper repairs. I am also a hobby artist and have been since i was a kid so I know a decent amount about different mediums and am decent at making designs for things. I am also in academia and teach at college level so I can help with writing or any homework around psych topics. Idk, what do you need help with?

I realize im asking a lot for this project so I am offering something in return.

*in the video I kept forgetting what the meter thing was called. I was referring to a voltage meter.

I misspoke about the very last sensor type I mention. Amazon does sell a pressure pad door bell. Its over priced, apparently doesn't work well and is not very responsive to pets. and lacks durability/longevity. It is not marketed as a pet doorbell per se but does have product images implying it can be used for dogs. but reviews say it is not reliable.

Other companies do sell Indoor pressure mats with alarms or notification systems for elderly care and such but these are $$$$ and also have poor reviews. I figured I would make my own. how hard could it be?

I think there is a demand for such devices. For dogs and cats. Assuming its not too hard to make and cost is low.

If this project is successful, I plan to post this on instructibles.com so other people can make one. I would be happy to mention your names as co-creators of the project.

5
22

Follow-up: a Raspberry Pi setup can be spacious indeed

Had the opportunity to test the #RaspberryPi 5 as a laptop, separately from everything else, and now I agree with the previous response saying it can be as big as a laptop:

https://thebrainbin.org/m/raspberrypi@lemmy.ml/p/655390

6
6
7
15
submitted 5 months ago* (last edited 5 months ago) by paper_mint@retrolemmy.com to c/raspberrypi@lemmy.ml

I've been wanting to get a Zero 2 but they're basically nonexistent. How likely do we think the Zero 1 to stay in supply? And are they worth getting or should I hold out for the Zero 2 to return? I kinda want to use it in a project but I don't want em to go dead before I can make a couple of units. thoughts?

8
6

Some thoughts about the size of a Raspberry Pi

#RaspberryPi

There's a bit of nuance I don't see being talked about their size and portability that I noticed after going back to mine after a while - they may seem larger due to accessories/cables, but they still take less space than a laptop PC.

Having used mainly laptops so far, I've yet to see any that doesn't take at least 50% more space than a Raspberry Pi in the same conditions, and laptops afaik are historically the portability option for a desktop-oriented experience.

Also, yet to test with a portable screen, so I don't depend on available TVs, but from what I checked on them, they barely seem to affect the space taken either.

Worst part is organizing the cables, specially when using the device, the difficulty to do so causing visual polution which gives the impression of a bigger setup.

But putting tidely in a backpack/bag/etc., and if managing to figure out how to organize the setup when having to use it, makes it still much better for portability than a laptop imo.

And sharing this because, if my impression is correct and there isn't much talk on this part indeed, some people interested because of the size/portability may get disheartened when they see the cables/accessories situation. But it's not bad, but is perfectly manageable and also, repeating myself, possibly the best option around.

@raspberrypi@lemmy.ml

9
15

Just spent 2 days trying to play DVDs on Raspberry Pis: remember to configure libdvdcss2

#DVD #RaspberryPi

If you also don't properly configure the dependency, you can run run this command without having to reinstall anything, marking yes for both prompts:

sudo dpkg-reconfigure libdvd-pkg

Before that, I tried a bunch of things, including trying to dump a disc's image with Brasero, and that's when I got the message that led me to finding out the issue and the fix, the message saying it was missing libdvdcss2, despite the dependency being part of libdvd-pkg which I knew I had installed.

Glad it wasn't an issue with either the discs, the system, either of the RPis, or the USB reader/player. e.e"

@raspberrypi@lemmy.ml

10
7
submitted 6 months ago by thehatfox@lemmy.world to c/raspberrypi@lemmy.ml

Has anyone ever replaced the fan on the Raspberry Pi PoE Hat? I’m one of the hats I have has a fan with a failing bearing and it sounds very loud and irritating.

Apparently the replacement fan part is AD0205MX-K59. But all the public sources I’ve found for that are rather expensive, and would probably cost nearly as much as a new PoE hat itself.

The fan has an odd connector so I can’t easily swap it out for a generic small fan either.

11
0

Inscription faite pour Nantes Maker Campus 2026 ✅

Atelier Raspberry Pi Pico en préparation 😊

Merci à Kubii pour leur soutien et la fourniture du matériel nécessaire pour l'atelier 😉

Rendez-vous les 5, 6 et 7 juin 2026 🗓️

On s'y retrouve ?

@raspberrypi@lemmy.ml @raspberrypi@threads.net #raspberry

12
6
submitted 6 months ago* (last edited 6 months ago) by IndigoGollum@lemmy.world to c/raspberrypi@lemmy.ml

It did just need to already have an OS on it. I didn't know that, but now it works.

I just got a new Raspberry Pi 3 and i'm trying to set it up now (mostly for Pi Hole). It has a micro SD card (FAT formatted). The only HDMI display i have is an Onn Roku TV, which doesn't detect the Pi plugged in over HDMI. It acts as if nothing was plugged in to the HDMI port.

The SD card in the Pi does not yet have an operating system. I have a Debian installer flash drive and i was planning to do that from the Pi.

I'm not even totally sure the Pi is on, because without a working screen all i have is the red power indicator light.

Is this a known issue between RPI and smart TVs? Am i just not turning it on right? Does it just need to already have an operatng system to boot into?

13
5
submitted 9 months ago by Maroon@lemmy.world to c/raspberrypi@lemmy.ml

I have a headless RaspberryPi Zero W that I wish to use as a server for remote printing so my neighbours and myself can have a common printer. The printer unfortunately is an HP LaserJet 1020 - the one my neighbour has happily given to me. But setting it up as a remote printer has been a horrible experience for me.

I'll write down a few of the commands I have tried to get it to work.

First I made sure that the laptop is connected to the laptop with the command :

lsusb

When I could see the HP printer I proceeded with:

sudo apt install cups hplips printer-driver-foo2zjs printer-driver-foo2zjs-common printer-driver-foo2zjs

From my laptop browser, I went to <my.ipv4.address>:631 and added the HP printer. Selected the driver. Checked the Shared Printer option.

Now, I rebooted the pi, re connected the printer, and tried to print something via my Linux Mint laptop. no luck

Then, I read around and found that I need to run the command:

sudo hp-setup

So, I ssh'ed back into the pi and tried to run this command and the entire pi crashed.

Has anyone managed to get this darn machine working nicely?

We're all Linux users, so I don't need to install samba and all that.

14
5
submitted 10 months ago by tdTrX@lemmy.ml to c/raspberrypi@lemmy.ml

Actual working projects, not PoC.

I am thinking of

  1. laser trip/motion detection on windows/doors with Wifi/LAN/LTE

  2. Door Camera with motion detection and NVR

15
3
16
34
submitted 10 months ago by sabreW4K3@lazysoci.al to c/raspberrypi@lemmy.ml
17
16
submitted 10 months ago by Grumpy404@lemmy.zip to c/raspberrypi@lemmy.ml

This has been on my mind alot, but im pretty lonely and depressed to say, i have family members but they dont like what i enjoy like we cant relate to each other usually. I want to make a robot someday that you can play games with, like it can press keys on a keyboard and move a mouse, that type of stuff? The concept seems hard and pricey for someone like me.

Would something like this even be possible in real life? or is it just another dream?

Would it be cheating if im lonely? i feel like this could possibly help people such as myself or people who are disabled in some way.

18
6
submitted 11 months ago by Luffy879@lemmy.ml to c/raspberrypi@lemmy.ml

Im currently making a costum 10x10 led matrix, and for it to be able to display senseable stuff, im trying to segment the display into 10 vertical lines which cycle at at least 100hz. Would a Python script on a raspberry pi be able to cycle its GPIO pins at this speed? Or Would an arduino or other Microcontroller be able to do it better?

19
14
submitted 11 months ago by RegularJoe@lemmy.world to c/raspberrypi@lemmy.ml

"The current pressure on memory prices, driven by competition from the AI infrastructure roll-out, is painful but ultimately temporary," CEO Eben Upton wrote in a blog post. He also said that the company looks forward to "unwinding these price increases once it abates."

20
-13
submitted 11 months ago by sabreW4K3@lazysoci.al to c/raspberrypi@lemmy.ml
21
16
submitted 11 months ago by sabreW4K3@lazysoci.al to c/raspberrypi@lemmy.ml
22
4

Going kind of crazy thinking about the options. I'm ultimately trying to get a stable media server running on my 4B (no transcoding) and I think I'm having power issues.

I had an externally powered NVMe enclosure but I stopped using it mainly because the enclosure wouldn't turn itself back on after a power surge. I switched to a 2.5 SSD with an unpowered adapter cable but occasionally the drive gets disconnected (guessing it's power issues). I would like to use the NVMe drives since I can easily fit the SSD into my desktop (ran out of NVMe slots). It would also be good if I had a solution that supported hardware RAID 1.

23
3
submitted 1 year ago* (last edited 1 year ago) by ItsAmber@lemmy.blahaj.zone to c/raspberrypi@lemmy.ml

Hello! I've done some troubleshooting on this and i feel like I'm going crazy.

I have a pi 3 B that I got for cheap at a garage sale a while back. It was still in its original packaging - practically brand new. Got around to setting it up yesterday morning and installing raspbian. So far, all good. It boots into Raspbian without issue.

Once in, I connect to the internet and run "sudo apt-get update". The mirrors all 404.

So to make sure I actually have internet, I ping google. No issues there; pings successful.

I try to navigate to raspbian.org on my phone. The website gives me a 502 bad gateway nginx error. So I assume the mirrors are down, but decide to check social media... And nobody is talking about it? Anywhere?

Is raspbian.org not a legitimate website? When I run the update, it seems like its trying to pull from mirrordirector.raspbian.org so I assume so.

So. My questions:

  • I've done a lot of googling on updating my mirrors, and have found relatively little. Does raspbian not have an automated mirrors updating tool?
  • Is raspbian.org not a legitimate website? If it is, why is nobody talking about it being down? Its been dearly 24 hours. It this regular maintenance?

EDIT:

Turns out the version of raspbian on the SD card this thing came with was so old it just couldn't update lol. Still have no idea what's going on with raspbian.org though lmao

24
3
submitted 1 year ago by pie@piefed.social to c/raspberrypi@lemmy.ml

hi, if anyone have those boards, can you please share what score do you get on them - in google octane and mozilla kraken?

25
5

I heard varying things, I expect to have like 6-8 people come over in a few weeks and I want to set up lancache.net, but performance wise would it be horrible on a raspberrypi 4? or decent? I heard many things about lancache support on the raspberrypi, so I would like to hear about that too.

I do have a intelnuc as a secondary server but it would be harder to set up lancache on that, also I think I need to get a wifi card to set up a AP network, so would it make significant difference for a 16gb ram and modernish intel cpu to run it?

view more: next ›

raspberrypi

6129 readers
1 users here now

Community about the single-board computers, micro-controllers and related projects.

https://www.raspberrypi.com/

Other RaspberryPi communities on Lemmy

founded 6 years ago
MODERATORS