Last year I made the little table for my older kids' bedroom for arts and crafts. I just made two little benches/stools for the table. Everything is cherry with basic mortise and tenon joinery. I shaped the legs with a hardboard template and a flush trim bit on the router table.
Even in the 80s it would have been a humorously dated reference to gangster movies. And you'd use it with a hammed-up accent, saying it like "coitans"
OpenScad because I do simple things like funnels or part bins.
I have the next model up (400 Pro) so mine will likely accept larger diameter branches. But with that said one needs to learn the machine's limits in terms of both diameter and wetness.
Before I chip up a pile of branches I'll go through with a swede saw and lop off any parts that are too big. That'll let me breeze through the pile without fighting the machine too much. Also cut apart any wide crotches that won't feed through on their own.
I have my old kitchen pantry in the shop for general storage. It's 24" wide and 24" deep which made reaching for things in the back of the shelf a real hassle. Not to mention making it hard to see back there.
So I made three pull out shelves where three fixed shelves were. 1/2" sides with a 1/4" bottom panel. I didn't have any thin plywood so I actually glued up the three panels from scrap - this was a great way to use up those "shorts" you can't bear to discard!
Thanks for posting that, I didn't understand the reference.
+1 to Freetax USA! It handles all the stuff which require premium editions of other tax applications. And this year they've added PDF parsing which greatly simplified my 1099s.
The $16 is if you're also filing state taxes with it. Federal is still free.
I wonder how many people actually only do federal with it? 2%?
I've had my Baratza Virtuoso since 2014-ish and was able to replace the burrs last year. Recommended.
What character is holding him hostage?
I would leave it alone. Given the age of the wood it will likely not crack any further. It has already dried as much as it can.
Researching work benches will often show many examples of the sliding deadman. I opted not to put one on my bench because I valued drawer space more.
On the rare occasion when I need to support a piece from the bottom I'll just use a clamp in expansion mode.
I dug around in the settings but didn't find anything related to titles. Any way to not have double titles appear?
Was that song overplayed?
I like the way he drew cars. They look weak and frantic.
Here's a simple box I just finished. Cherry with dovetailed corners.
It turned out well but I regret using cheap hardware from Amazon,especially the stamped hinges.
Finish sequence:
A variety of mouth shapes would makes the characters more dynamic. It really does look like they're always yelling.