Hi!

I have crown molding LED lighting I'm doing. Its turning out well, but most rooms need multiple strips. Not a problem, but the two strips are slightly different color temp. Does anyone know if there's a setting I can play with to get them closer to alignment?

Setup notes:

• addressable LED strips
• 24v with oversized power supply
• driver running WLED
• two channels on same driver (one strip per).
• strip lengths are very close but not identical length

Hi All,

I was lucky to have implemented a really cool HA project at work; we have all of our reactors running on ESPHome, reporting to HA. All setpoints are maintained locally, so HA just aggregates the data and acts as the interface to change setpoints; HA is not involved with any control loops, so you could take an axe to the server and the reactors would happily chug along none the wiser.

My Question: Are there any tools that allow for easy field inputs, like one would in excel?

We check our reactors twice daily manually, and that won't change. It's how we assess things like sensor drift, notice little maintenance items/flow balance issues etc. Someone uses a clipboard and fills out a whole worksheet, then this worksheet is entered by a supervisor (me) into a large, rolling spreadsheet.

What I'd like to do is not automate, but digitize that process. We will already be implementing tablets for a reactor readout, I'd like to create a dashboard that an operator inputs read values (all sensors are backed up by analog, physical indicators). Are there any dashboard tools that allow that? Either vanilla or HACS is fine.

Thanks!

PS: I'm "stealing" the code for my home bog garden. Boss is fine with me sharing it, but I'm going to do so after I implement it at home so I can be sure there's nothing proprietary or identifiable in the YAML. We don't do code/software so boss doesn't care, but reactor setpoints etc would be bad. But when I open it up it'll be a plug and play system for controlling multiple levels, flow, pressure, pH, temp.

Maybe not the correct place but I know a lot of folks use NFC tags to trigger automation.

Does anyone have experience with a tag in-between their phone and the wireless charger? I have a few wireless charging stands I'd like to set automations to (ie: "I've set my phone on the nightstand charger, X,Y,Z lights should be set to red if they're turned on now"). I'm just not sure how close the freqs both use are (and even less sure of how much interference causes issues).

So yeah, has anyone used an NFC tag in-between their phone and wireless charger without melting either?

Hi All,

Bargain outlet near me had a bunch of the “monster smart illuminessence” stuff at a price that made me try one.

A few hours later and I have them running properly on LocalTuya. I went and scooped up a bunch more given the success.

My question is: When is the local key issued and when does it change?

I’d like to get them all taken care of and put in the box with key written down so I can delete the official tuya app, and also not have to worry about if Tuya will change it’s dev policy so I can’t get access to the keys anymore.

As a side note, I’ll give Tuya credit, I can easily see where that is a great tool for folks looking to offer smart goods… it’s also exactly why I’ll always be local only.

Hi All,

Bargain outlet near me had a bunch of the "monster smart illuminessence" stuff at a price that made me try one.

A few hours later and I have them running properly on LocalTuya. I went and scooped up a bunch more given the success.

My question is: When is the local key issued and when does it change?

I'd like to get them all taken care of and put in the box with key written down so I can delete the official tuya app, and also not have to worry about if Tuya will change it's dev policy so I can't get access to the keys anymore.

As a side note, I'll give Tuya credit, I can easily see where that is a great tool for folks looking to offer smart goods... it's also exactly why I'll always be local only.

Hi All,

This will be difficult to pin down, but getting pointed in the right direction would be helpful.

Purchased a FlashForge AD5X ~5 weeks ago. Worked great, one button calibration out of the box, I proceeded to do what everyone does when learning: print a bunch of stuff, mix success and stumble over the usual stuff. Ie: Learned why you clean the bed, learned how supports work, deal with filament breaks etc etc.

About a week ago I had a print fail, it looked like there was a broken filament that wasn't being pushed. I do a cold pull on the nozzle, and was able to print successfully for a time (although there were some small features on some prints that seemed sloppy compared to previous prints).

After that though ALL my prints started to fail. Even after cleaning the bed, double checking bed/nozzle temp, I'd get bad adhesion. I'd also get the nozzle dragging through layers, as if the Z was off (even after running calibration repeatedly and before each print). There was some popping and oozing, which I put up to not storing my PLA dry (although ambient was only ~40%). However the problem persisted even with a freshly opened vac-sealed (confirmed seal was good) roll of PLA.

I ordered a replacement nozzle that arrives today, but can anyone give me some insight? I only ran ~2kg of PLA through, that seems like really premature wear; I must have done something wrong.

Thanks for anything putting me in the right direction.

Stumbling through getting a proper backup regime in place. I have an unraid system running a proper array, and am trying to setup backups for two separate machines (one windows one debian). I've successfully setup a file share, and have duplicati running. Are there disadvantages to just setting the network folder as the destination for the backup? It seems a little hamfisted (and the data rates are terrible).

It seems like there's probably a better way to do this...

Hi All,

I have a somewhat ridiculous setup where I have:

• 4 monitors all fully adjustable arms
• 2 totally separate PCs (one running windows for mostly work, the other debian for sanity)
• all monitors going through switches so any can be either machine with the push of a button (in any combination)
• A M&K switch that swaps my M&K from one machine to the other by double clicking the scroll wheel.

As you can imagine this takes some space. I have both boxes under my desk towards the edge, and have a three section cabinet in front of my desk to neaten everything up/hide cables. It's kind of like the one in the picture, except mine would be an isosceles trapezoid from a top view.

It works well, but I don't really use the cabinet as, well a cabinet. What I'd like to do is mount each computer in the left and right area of the cabinet. At some point, I'd get around to getting an old electric fireplace (preferably a craigslist or garage sale on that didn't work as a heater), take the door off the center cabinet, mount the fireplace in there and tie brightness to fan speed (that part I can do). As a bonus I'd put a mechanical vent switch that let me output heat to the front, or behind, where my feet are under the desk.

My question is: what do I need to do to ensure proper grounding? Also, are there any rules of thumb for air circulation? Any other pitfalls you might be able to think of?

I am also considering putting the guts of both PC's in the center section of the cabinet, but I think that would make it a bit crowded for the fireplace insert.

Hi All,

Looking to steer into HA, but have some questions on how data is handled.

First, I don't mean the opt-in on the scant analytics. HA is very clear about that which is great. Awesome clear policy.

Second, I understand that "integrations", which use a device manufacturer's/services software/infrastructure, are outside scope here (although I do have some questions).

My goal is to find and work a system where no one knows when my lights are turning off and on, and is only on my hardware. IE: If the internet went down, but I was still connected to local wifi, can my HA still work?

The answer seems like a strong "yes", but I want to double check. I also want to make sure if I do use an integration that there's not an avenue for telemetry beyond that integration. IE: I don't want Spotify to gain access to what temperature I keep my house just because I want to play music.

I also have questions about the mobile app, but if the rest is truly locked down, I can navigate that.

I currently have an automated bog garden, but how I did it isn't really scalable. It's all modbus components with values passed to a local server to generate a dashboard. I'd like to expand to more actual "home" automation, and this seems like a great tool!

Thanks for any clarification.

Pretty much the title. I'd like to add it to the archives.

Hi All,

I'm screening a large media library (20TB) wherein some files got corrupted when I did a transfer via filezilla (by my guess ~10%). The corrupted files display with a green "filter" over every frame (when played via plex and a number of local video players playing the file directly).

I'd like to screen the library, and want to write a script to get an average color reading.

Are there any libraries that would let me return a value AND specify how many frames I want it to take the average of? Because of how consistent and defined the issue is, it's really not necessary to average the whole file.

It would also be great if it automatically skipped non-video files, but I imagine a simple "try/except" would be fine.

My skill level here is best described as "high level hobbyist". I'm familiar with what I need to do iterating over the folder etc, but would prefer not to learn how to pull specific frames from a video container unless I have to.

Thanks for any help!

Hi All,

About a year ago I transferred all my files to a new drive. I used filzezilla which did mostly ok-ish, but I didn't notice that some of the video files were corrupted. Random files will have a green tinge to them (like someone put a green filter over the lens).

It seems random, although if it's a series it's usually the whole series.

I've been replacing them as they come up, but I was wondering if anyone had any bright ideas to expedite the process.

Thanks for any help!