Ergonomic, split and other weird keyboards
Posts must be of/about keyboards that have a clear delineation between the left and right halves of the keyboard, column stagger, or both. This includes one-handed (one half doesn't exist, what clearer delineation is that!?)
i.e. no regular non-split¹ row-stagger and no non-split¹ ortholinear²
¹ split meaning a separation of the halves, whether fixed in place or entirely separate, both are fine.
² ortholinear meaning keys layed out in a grid
No excessive posting/"shilling" for commercial purposes. Vendors are permitted to promote their products/services but keep it to a minimum and use the [vendor] flair. Posts that appear to be marketing without being transparent about it will be removed.
This subreddit is not a marketplace, please post on r/mechmarket or other relevant marketplace.
You can use any pins from D0 to D21. You can find out where each pin is by searching for "nicenano pinout". You will have to change the firmware later to fit the chosen pins.
If you already have a Firmware you can find the pins (at least in QMK) in the info.json or config.h file. I have never used ZMK but the used pins have to be in one of the files.
I made mine this year, but used pro micros instead of the nice nanos. Used a perf board to attach the controller and TRS connector. Zip ties to attach the perfboard to the case.
I designed a holder for the nice!nano and the battery. Now I only need to find a i/o switch which fits to the TRS hole. Wire everything up and try to get the ZMK right.
Hey, in the bastardkb docs, there is a tray holder for the nano/pro micro that looks to fit inside your build, also works on my Scylla. It's its own repo. I think you can slip the battery between the pins.
Then check if your are rol2col or col2row, there is explainer inside the zmk docs.
Next, find the pins, n!n pinout, and make sure your overlay and dtsii? File has the right order of matrix,. eg the 0,0 0,1... 0,5 and that it matches with how you wired your board. And the right row2col setting.
Zmk docs also has a nice explainer for he matrix stuff.
You mean this one? I found that, but it was part of the kit I didn't want to use. Also I missed the opportunity when somebody sold some on them on the discord channel. By now I designed a 3d printed tray, which holds 401430 LiPos (they do not fit below the nice!nano, but I cannot find 301230 for sale). Next step will be the wiring and before that I will have to figure out the pinout part.
Is the one that is working for me. I assume the other kb from Bastard would fit, but only a guess.
I am wiring mine currently and did a bit of debugging, but I'm a trial and error guy and nearly done. So I would say just jump in :)
Oh, I missed that one. Thanks. However, I designed my own one. Since my design has a pocket for the battery I think I will stick to it.