this post was submitted on 05 Oct 2024
41 points (95.6% liked)

Homestead

450 readers
66 users here now

[Were you a mod of Homestead on Reddit? Message me if you’re interested in modding here.]

This is a community for people who are working toward a sustainable personal environment. This includes crofters, homesteaders, hobby, small, and family farmers. Hunters, gatherers, cultivators, and keepers are all welcome.

There may be discussions of animal harvesting and processing. This is part of the homesteading reality. If you don't like it leave and block the community.

You may also be interested in:

Backyard Chickens

RULES:

  1. All Lemmy.ca rules apply here.

  2. Everyone (see rules 4 and 98) is welcome.

  3. If you've seen a question 100 times answer it the 101st time or ignore it. Even better, write a complete, detailed answer and suggest that the mod(s) pin it to the community.

  4. There will be ZERO tolerance for shaming, brigading, harassment, or other nonsense of those who keep, hunt, harvest, and process animals. [See rule 98.] You will be permanently banned the first time. You are NOT morally superior because you choose not to.

  5. If you post a picture that includes blood, gore, or a dead animal mark it NSFW. We're not going to tolerate the militant anti-hunting and anti-farming bullshit here but we're also not going to tolerate people rubbing their hunting and harvesting in people's faces. [See rule 98.] If you post blood, gore, or dead animals and don't mark it NSFW it will be removed.

[Did you actually think there were 98 rules?]

  1. If you present something as fact and are asked to provide proof or a source provide proof or a source. Proof must be from a reliable source. If you fail to provide proof or a source your post or comment may be removed.

  2. Don't be a dick. Yes, this is a catch-all rule. Yes, you absolutely can be permanently banned for Rule 98 violations.

  3. The mod(s) have the final say.

founded 1 year ago
MODERATORS
 

In search of a dedicated small engine community I come here.

I have an older husqvarna frontrider with a hydrostatic transmission. While checking the transmission oil I noticed that the fan had broken of most of the blades.

Looking at the transmission cover I can see that it has been grazed by the blades, suggesting that the fan has been pulled sideways.

The oil check was part of a small service, that I was doing since I had to replace both belts going to the cutting deck as well as the belt in the deck. Those belts died when the belt tensioner, in middle of the mower, came loose and dangled beneath the mower.

My questions are these:

  1. WTF?
  2. If the belts have pulled that much in the engine driveshaft, as to do this, what else would you look for before starting the mower again?
  3. Given that it's about 10°C outside, would you run the mower without a fully functioning fan?
  4. Have I missed something? Any wisdom you wish to impart?
top 15 comments
sorted by: hot top controversial new old
[–] Barzaria@lemmy.dbzer0.com 3 points 6 hours ago

When your finally able to start the mower please update this thread! I have to know.

[–] mvirts@lemmy.world 6 points 11 hours ago (1 children)

If you can, I recommend waiting until you can replace the fan. Maybe this fits?:

https://www.amazon.com/Husqvarna-Fan-black-1a646083070-Replaces-414415-583350101/dp/B00TD59K9K/

Have you discovered why the tensioner failed?

If you haven't already, considered getting new belts.

[–] BigDanishGuy@sh.itjust.works 7 points 7 hours ago

If you can, I recommend waiting until you can replace the fan. Maybe this fits?:

https://www.amazon.com/Husqvarna-Fan-black-1a646083070-Replaces-414415-583350101/dp/B00TD59K9K/

Thanks, I've already found a local source though. I'm in Denmark and much of the stuff on Amazon doesn't ship here. It does look exactly like the one I need. The part number in my manual is 5069868-01

Have you discovered why the tensioner failed?

My theory is that I attempted to cut too much too fast. Normally I'll just rip belt #2 in the picture below. This time shaft #14 came loose from bolt #15 so the entire assembly dangled below the mower. The tensioner pulley #25 may have gotten stuck, because it was demolished in the process. Part of a parts diagram for a Husqvarna rider r16c

If you haven't already, considered getting new belts.

Oh, I have. I replaced belt #3, as well as pulley #25 and the belt in the cutting deck. Belt #3 and the cutting deck belt was ripped, while I belt #2 seems ok. I did order a replacement for #2 though. Just kinda annoyed that I didn't notice the fan issue earlier, because I was really planning on giving the garden an autumn mowing this weekend.

[–] jmiller@lemm.ee 13 points 13 hours ago* (last edited 12 hours ago) (3 children)

I don't think the hub of the fan was pulled over to make those grazes, I think it's more likely those happened when blades broke off or something went into the fan and was dragged over the transmission case.

As for running without, that fan is partly there for direct cooling, partly to keep grass clippings from collecting on top. Even in cooler temps, a blanket of clippings could make it get hotter than it should be.

[–] BearOfaTime@lemm.ee 1 points 5 hours ago (1 children)

Crazy to me there's no guard on that fan. Even one with large openings, chicken-wire type (but stronger) would've prevented whatever got in there to cause the blades to break.

[–] BigDanishGuy@sh.itjust.works 2 points 4 hours ago (1 children)

You mean besides the cover? Nothing should be able to get in there that could do this.

[–] jmiller@lemm.ee 1 points 3 hours ago

It probably happened when the tensioner failed and the belt flew off.

[–] GloriousGherkins@lemmy.world 6 points 10 hours ago

This is the right answer. The fan should be easy enough to fix since it’s held in with a clip, and a quick search for that fan shows they’re less than $20 in the US.

[–] Anticorp@lemmy.world 1 points 7 hours ago

In addition to getting hotter than it should be, the grass could catch on fire and make for a very bad day.

[–] shasta@lemm.ee -2 points 7 hours ago (1 children)
[–] BigDanishGuy@sh.itjust.works 2 points 4 hours ago

You sound like the mrs... But a new, comparable, mower is about 5000€ and I have a too close and personal relationship with my money to part with that much money for when a 25€ part might do the trick.

[–] Blue_Morpho@lemmy.world 3 points 12 hours ago

It will reduce the lifespan but not kill the transmission to run it without the fan- especially because you said it's 10C.

As you can see the fan is held on with a clip and easy to replace- unlike my zero turn.

[–] Lurkinney@lemmy.world 3 points 13 hours ago (1 children)

Is there any play in the fan when you take the belt off?

[–] BigDanishGuy@sh.itjust.works 2 points 7 hours ago (1 children)

I'll have to investigate that, but there wasn't any play with the belt on.

[–] Lurkinney@lemmy.world 1 points 4 hours ago

Could you have possibly run over some brush that could have made it's way into the engine compartment?