this post was submitted on 28 Oct 2024
37 points (93.0% liked)

Linux Gaming

15892 readers
5 users here now

Gaming on the GNU/Linux operating system.

Recommended news sources:

Related chat:

Related Communities:

Please be nice to other members. Anyone not being nice will be banned. Keep it fun, respectful and just be awesome to each other.

founded 4 years ago
MODERATORS
 

Is there a consensus on how to run Steam and games isolated from the main system? I've seen Flatpak mentioned in some Reddit post but I'm not sure how good the separation is. Everything about Flatpak sounds like an early work in progress, but I can be convinced otherwise.

I don't trust Steam or the closed source games at all. Currently I've got a second disk with a separate system for gaming, but I very rarely have the motivation to reboot. I want to game more (and spend less time on social media) but compromising my main OS is out of the question. Stuff in the home directory should be isolated from the games. Ideally no network access too, but Steam will not work in that case.

If someone has seen a ready made guide I'd be happy to read it. Any tips would be nice too.

top 20 comments
sorted by: hot top controversial new old
[–] hirihit640@sh.itjust.works 10 points 3 weeks ago* (last edited 3 weeks ago) (1 children)

Intermediate route: pass through your GPU to a virtual machine running Windows or Linux+Proton. This is the strongest isolation aside from dual boot or using a second device. There are a lot of tutorials online but the archlinux wiki is a good place to start. This usually means you need a second GPU for your main system (an iGPU works if your CPU has it), or you can use janky scripts to switch the GPU between your main system and the VM. You also might need a KVM switch to switch your monitor and keyboard between your main system and the VM.

Expensive route: if you have two PCs you can set up one for game streaming using Sunshine, and stream games to your primary PC. Benefit of this approach is you can also stream to your tablet or android TV.

[–] oldfart@lemm.ee 1 points 3 weeks ago (4 children)

That is an interesting idea, I was about to buy a GPU for AI, right now I have one whose primary feature is not using a lot od energy. Am I going to need a dedicated monitor for games if I set it up this way?

[–] Codilingus@sh.itjust.works 3 points 3 weeks ago (1 children)

I did the vfio passthrough years ago, rocking two monitors like I always have.

Top monitor was Linux only via Display Port. Bottom was Linux via HDMI, and Windows via DP. Small cheap AMD GPU for all the Linux, and big boy AMD GPU was only for Windows VM.

I would turn on the VM, and then toggle my bottom monitor from HDMI to DP to game, and then the reverse when finished. Could be done all the same without the top monitor.

A neat trick I figured out, was the Windows VM was actually a bare metal Windows install on a separate SSD that could be booted into normally, but also passed through to the VM when using Linux.

[–] oldfart@lemm.ee 3 points 3 weeks ago (1 children)

Which hypervisor? I tried booting a physical install this year with VirtualBox and two decades ago with VMWare Player and both times ended up with damaged bootloader that was unable to boot from bare metal

[–] Codilingus@sh.itjust.works 3 points 3 weeks ago* (last edited 3 weeks ago)

My memory isn't the best on this, as it was close to 10 years ago, I just now had to look up some YouTube's and images to see which things I recognized.

I was using Arch and I'm pretty sure I managed everything with Virtual Machine Manager.

I know 100% I used vfio, and I wanna say qemu as well.

The one thing I remember most, was I couldn't use Virt Manager's GUI to just straight up add the Windows SSD. I had to use the GUI to add something similar, but then had to go and directly edit the XML. It took me forever through trial and error, but I wanna say I finally was like fuck it, and changed the XML entry to just straight up /dev/nvme and it worked.

Never had any bootloader issues. I think I let Windows have its own EFI boot partition it installs automatically, but also gave my arch install its own EFI boot partition as well. When I wanted to boot Windows bare metal, I would just press F8 on boot and select the Windows Boot manager entry, as opposed to booting into systemd-boot and selecting Arch or Windows.

[–] Giloron@programming.dev 2 points 3 weeks ago

Yes/no. The KVM solves that. When I did it I just connected my monitor's second input to the second video card.

[–] hirihit640@sh.itjust.works 2 points 3 weeks ago (1 children)

KVM switch is the easiest way, you just plug both GPUs into your monitor, and switch between the two depending on if you want to see your main system or your VM. The Archlinux wiki also talks about "Looking Glass" which passes through the VM's display to the main system. I haven't tried this so YMMV. Alternatively you can run Sunshine inside the VM and stream to the main system. Maybe overkill if you are only using a single PC, but if you've got other devices you can stream to those too.

As a veteran to VFIO and GPU passthrough, I would recommend the KVM option first. It's often worth buying cheap workarounds to start with, before diving into complicated software and networking setups like Looking Glass or Sunshine.

[–] oldfart@lemm.ee 1 points 3 weeks ago (1 children)

Sunshine sounds pretty decent but yeah, one step at a time. Thank you.

Sunshine in general sounds very tempting, I don't play AAA games so an old laptop may be sufficient for most games, and the desktop clients are free.

[–] hirihit640@sh.itjust.works 2 points 3 weeks ago

Sunshine is actually pretty easy to set up. Just install it on the PC, and connect from a Moonlight client on the same LAN. The complicated part is if you want to get fancy with the networking, for example if you want to access it securely from outside the home, or if you run Sunshine inside of a VM and want to access it from outside the host. But if your laptop can handle the games you want to play, turning it into a game streaming server should only take an hour tops. Definitely easier than messing with passthrough and virtualization.

[–] Jumuta@sh.itjust.works 1 points 1 week ago (1 children)

you won't need a dedicated monitor if you use Looking Glass

[–] maxwellfire@lemmy.world 9 points 3 weeks ago (1 children)

Since games don't have to run with more than user privileges and steam runs in flatpak, you could run them as a different user account with very limited permissions.

That said, flatpak should be pretty secure as far as I'm aware if you make sure that permissions for the apps running are restricted appropriately. I'm not sure how restricted you can make steam and still have it work though

You can use offline mode for steam if you're okay with steam having internet but not games. But there's no way to use steam entirely offline. Internet access is a fundamental part of the system they have.

There's also a question of what your threat model is. Like are you trying to prevent causal access of your files by games, or like a sophisticated attempt to compromise the system conveyed through a game. For the former flatpak seems sufficient. For the latter you probably need a dedicated machine. And there's varying levels in between

[–] oldfart@lemm.ee 3 points 3 weeks ago

I doubt the potentially malicious games will have code sophisticated enough to bypass a sandbox, just because majority of users don't have a sandbox for them, and I'm not paranoid enough to fear targeted attacks. Other than that, the game shouldn't have access to my home directory or network.

[–] mudle@lemmy.ml 9 points 3 weeks ago (2 children)

Flatpak's security and sandbox has gotten much better in recent years. I've been using Steam via Flatpak for a while now and haven't run into any issues yet, other than not being able to make desktop shortcuts of my games.

I use Flatseal (another Flatpak application) to further restrict my Flatpak's permissions) The default Flatpak permissions for Steam aren't bad IMO (at least when compared to other Flatpaks) but you can tweak it to your liking using Flatseal.

If you want to take it a step further, I would recommend using Goldberg's Steam Emulator, which is FOSS, and it will allow you to bypass Steamworks DRM (which is Valve's very weak DRM) for games which solely use Steamworks DRM.

I find that the overwhelming majority of my games just use the Steamworks DRM if any, but YMMV. Using Goldberg's Steam Emulator is also a good way of preserving your library if, in the unfortunate case, Valve decides to remove a title from your library for whatever stupid licensing reason they come up with.

After freeing your games using Goldberg's Steam Emulator you then could use the Flatpak of Lutris and disable network access for Lutris/further restrict permissions it has to the rest of your system using Flatseal.

[–] oldfart@lemm.ee 4 points 3 weeks ago

Amazing, this way I could restrict network access with normal tools like firejail instead of fiddling with Flatpak. I've never heard of this tool before: https://mr_goldberg.gitlab.io/goldberg_emulator/

[–] ReversalHatchery@beehaw.org 1 points 3 weeks ago

I don't think the goldberg emu allows bypassing the steam drm. what it allows is to run steam-dependent games without steam. For the rare games that use steam drm, you have to patch it with a patcher tool

[–] julianh@lemm.ee 5 points 3 weeks ago

People are right about flatpak - it will generally keep stuff out of your actual root/home directory. But like you implied, the steam flatpak is unofficial so you may run into issues. With that said, I've used it and know many people who use it without any problems.

And depending on the game, you might be able to run it directly with steam offline, or even straight from the executable without steam open at all.

Of course this isn't airtight, but there are ways to check the permissions granted to flatpak applications. And IMO it works well enough for games. Ofc this depends on how paranoid you are and your reasons for wanting this (fear of a game being a virus, not wanting clutter in home, wanting protection from a bug that would delete data, etc.).

[–] Auster@lemm.ee 2 points 3 weeks ago* (last edited 3 weeks ago) (1 children)

I'd have 4 main solutions I can think of, and that can be used together if needed:

  • VMs for running Steam and for games that MUST use Steam.
  • Emulators, wrappers and source ports for games that allow that, e.g. BSNES for running River Girls Zero, Joiplay / Artemis / EasyRPG / AquariaOSE for games that use compatible engines, etc.
  • Having a separated computer you can use 100% offline (requires sideloading games)
  • The annoying idea some users give that strays from the original question, but that I think that is valid for once - to get the games from places that openly distribute it DRM free
[–] oldfart@lemm.ee 1 points 3 weeks ago

Well, DRM is not the problem here, I don't trust the games too. DRM or not, they can do what they want with my data.

I'm not saying DRM is good but it's not in the scope of this post.

[–] ouch@lemmy.world 1 points 3 weeks ago

This is a topic I would like to do something about. I'm not comfortable running games with full access to my home directory.

I hope someone with firejail or bubblewrap setup can share their thoughts.