30
Homemade vacuum releaser. (lemmy.nz)
submitted 6 months ago by MapleEngineer@lemmy.world to c/maple_engineering@lemmy.ca
6 comments fedilink hide all child comments

This is my vacuum releaser. I built it from 12" PVC watermain that I pulled out of the garbage pile at a local construction company, aluminum that I bought at my local metal supply company, lexan that I bought and had machined at a local plastic supply company, and blumbing that I bought on Ebay, Amazon, AliExpress, and at local hardware stores. The large white pipe and the clear check valves are from CDL.

I spent the day today cleaning everything, replacing a couple of o-rings, and putting the machine back together. I had a big vacuum leak that it took me a while to find but I eventually managed to get the main releaser chamber down to 26.5 inhg.

top 6 comments
sorted by: hot top new old
[-] DontRedditMyLemmy@lemmy.world 7 points 6 months ago

What is it for?

[-] MapleEngineer@lemmy.world 11 points 6 months ago

It's like an airlock. The whole system is under vacuum. The vacuum sucks the sap in from the trees and it fills the top chamber. When the top chamber is full valves change that isolates the vacuum pump and releases vacuum in the upper chamber by letting air in. That forces a check valve in the tubing from the trees closed so the tubing stays under vacuum. Then, the weight of the sap pushes another check valve open and lets the sap run into the lower chamber. When the sap has all run out of the upper chamber the valves reset and it starts sucking sap in from the trees again while a pump pumps the sap from the lower chamber into a IBC.

[-] swicano@programming.dev 7 points 6 months ago

What's a vacuum releaser? Are you doing this to reduce the amount of boiling the sap you need to do?

[-] MapleEngineer@lemmy.world 8 points 6 months ago

The vacuum releaser is like an airlock. I draw the hole system down to a moderate vacuum which pulls the sap in from the trees. Once the upper tank is full I have to get the sap out somehow. If I just open a valve the vacuum will suck air in but the sap won't run out. The vacuum releaser closes a valve to the vacuum pump and opens a valve to the air. That releases the vacuum. When the air rushes it it closes a check valve that keeps all the tubing in the woods under vacuum then the weight of the sap pushes another check valve open and the sap runs into the lower tank. When the sap has all run out the valves reverse, a vacuum is drawn in the top chamber, and the sap starts coming in from the trees again.

The idea is to get the sap out of the vacuum without letting all the vacuum all the way out to the trees go. It takes a while to get the whole system back down to vacuum so I preserve as much of it as I can.

[-] swicano@programming.dev 1 points 6 months ago

Ohhhh, so it's part of the sap collection process. That makes sense that you gotta get the sap out of the vacuum side as it fills up, without pressurizing the whole system

[-] MapleEngineer@lemmy.world 2 points 6 months ago

Yup. Exactly. It releases about 30 litres of sap at a time.

this post was submitted on 01 Mar 2026
30 points (100.0% liked)

Maple Engineering

183 readers
1 users here now

Welcome to Maple Engineering

Visit Maple Engineer on YouTube.

This is a community for those who come up with creative ways to make maple syrup. You don't have to be designing and building homemade vacuum or RO systems to participate. Have you done something cool with your buckets and spiles? Tell us! Are you proud of your tubes and buckets? Show us! Have you built your own homemade gravity of pumped vacuum system? Show it off! Do you design, build, or install giant, gleaming, stainless steel maple syrup production systems? Tell us all about it! If you don't make maple syrup but love it on your pancakes of johnnycake and want to ask question, ask away. The people posting here love to talk about making and eating maple syrup.

You may also be interested in:

Maple_Syrup

RULES:

  1. All Lemmy.ca rules apply here.

  2. Everyone (see rule 98) is welcome.

  3. If you've seen a question 100 times answer it the 101st time or ignore it. Even better, write a complete, detailed answer and suggest that the mod(s) pin it to the community.

[Did you actually think there were 98 rules?]

  1. If you present something as fact and are asked to provide proof or a source provide proof or a source. Proof must be from a reliable source. If you fail to provide proof or a source your post or comment may be removed.

  2. Don't be a dick. Yes, this is a catch-all rule.

  3. The mod(s) have the final say.

founded 3 years ago
MODERATORS
MapleEngineer@lemmy.ca
MapleEngineer@lemmy.world