this post was submitted on 21 Jul 2026
196 points (91.9% liked)

Cool Guides

6557 readers
1 users here now

Rules for Posting Guides on Our Community

1. Defining a Guide Guides are comprehensive reference materials, how-tos, or comparison tables. A guide must be well-organized both in content and layout. Information should be easily accessible without unnecessary navigation. Guides can include flowcharts, step-by-step instructions, or visual references that compare different elements side by side.

2. Infographic Guidelines Infographics are permitted if they are educational and informative. They should aim to convey complex information visually and clearly. However, infographics that primarily serve as visual essays without structured guidance will be subject to removal.

3. Grey Area Moderators may use discretion when deciding to remove posts. If in doubt, message us or use downvotes for content you find inappropriate.

4. Source Attribution If you know the original source of a guide, share it in the comments to credit the creators.

5. Diverse Content To keep our community engaging, avoid saturating the feed with similar topics. Excessive posts on a single topic may be moderated to maintain diversity.

6. Verify in Comments Always check the comments for additional insights or corrections. Moderators rely on community expertise for accuracy.

Community Guidelines

By following these rules, we can maintain a diverse and informative community. If you have any questions or concerns, feel free to reach out to the moderators. Thank you for contributing responsibly!

founded 3 years ago
MODERATORS
all 17 comments
sorted by: hot top controversial new old
[–] Eternal192@anarchist.nexus 31 points 1 week ago (2 children)

If you are a big fan WD-40 then use WD-40 White Lithium for lubrication because normal WD-40 is not a lubricant.

[–] tal@lemmy.today 10 points 1 week ago (3 children)

It does lubricate, but it's not as effective as dedicated lubricants.

[–] lokalhorst@feddit.org 5 points 1 week ago (1 children)

It almost seems like it's a multi purpose tool, just like duct tape

[–] SailorFuzz@lemmy.world 6 points 1 week ago* (last edited 1 week ago) (3 children)

Which is also one of the worst tapes for the job its named for.

Actually duct tape sucks at most jobs its used for. It dries out, it cracks, its not airtight, the glue degrades quickly...

[–] NigelFrobisher@aussie.zone 4 points 1 week ago

Cos it’s actually a trademark-avoiding name for unbranded Duck Tape.

[–] Onomatopoeia@lemmy.cafe 2 points 1 week ago

Gorilla brand tape is a lot better than the generics.

The adhesive is strong enough to remove coatings/surfaces, or rip weaker woods apart (after sitting long enough).

It's pretty permanent.

[–] ParadoxSeahorse@lemmy.world 2 points 1 week ago

Because it was just trademark dodging, you should be using it on ducks

[–] binarytobis@lemmy.world 4 points 1 week ago (1 children)

WD-40 is designed to break up rust and grime and allow something to move again. Because of this, most of it evaporates quickly and the small amount of lubricant that remains wears out quickly. The example I’ve heard is that you would have to reapply it to a bike chain every 10-20 miles. It also removes actual lubricants like lithium grease and graphite.

WD-40 is a terrible lubricant that only works short-term.

[–] ohulancutash@feddit.uk 2 points 1 week ago (1 children)

It’s designed to remove lubricant. It isn’t a long term solution.

[–] tal@lemmy.today 1 points 1 week ago

https://www.wd40.com/products/ez-reach/

WD-40 Multi-Use Product protects metal from rust and corrosion, penetrates stuck parts, displaces moisture and lubricates almost anything.

https://en.wikipedia.org/wiki/WD-40

WD-40 (Water Displacement, 40th formula) is a penetrating oil manufactured by the WD-40 Company based in San Diego, California.[1] Its formula was invented for the Rocket Chemical Company in 1953,[2] and it became available as a commercial product in 1958. It acts as a lubricant, rust preventive, penetrant and moisture displacer. There are specialized products that perform better than WD-40 in many of these uses, but WD-40's flexibility has given it fame as a jack of all trades.[3]

There's a degreaser sold under the broader WD-40 brand. Might be what you're thinking of:

https://www.wd40.com/products/industrial_strength_degreaser/

WD-40 Specialist Degreaser is a powerful, fast-acting formula designed to quickly clean tools, machinery, engines, and equipment, restoring their appearance and ensuring smooth operation. Featuring a proprietary industrial-strength solvent, it effectively breaks down grease while remaining safe for use on multiple surfaces, unlike other harsh degreasers. 

[–] anomnom@sh.itjust.works 7 points 1 week ago

If you don’t want it covered in white goop, or it’s a lock, use dry lube. WD-40 used to sell a ptfe lube that worked really well, but I don’t know if it’s still available.

[–] 5715@feddit.org 4 points 1 week ago* (last edited 1 week ago)

Instructions unclear, annoying roommate is covered in WD-40

[–] kungen@feddit.nu 3 points 1 week ago (1 children)
[–] Onomatopoeia@lemmy.cafe 2 points 1 week ago (1 children)

PB Blaster for stuff that's stuck together (rusted bolts).

Big fan of silicone, dry lube or lithium otherwise (depending on lubrication needs).

[–] kalpol@lemmy.ca 1 points 1 week ago

Throw a tube of dielectric grease in there and a lot of heavy machine grease and this is my lube cabinet

I'm gonna use this as a profile pic, not sure which account atm.