658

My stove oven is broke and that's how it be.

top 50 comments
sorted by: hot top new old
[-] Semi_Hemi_Demigod@lemmy.world 51 points 1 week ago

It’s <blink>12:00</blink> somewhere

[-] Rocketpoweredgorilla@lemmy.ca 14 points 1 week ago

Mine's been blinking "18:88" for over the last 5 years now. It's a pain in the ass to set the clock on it so I gave up a looong time ago, and don't even notice it anymore. Besides there's already a clock on the wall, on the coffee maker, on the microwave, and one on my wrist so it just adds to the confusion.

Lke they say, "man with many clocks never knows what time it is."

[-] ApathyTree@lemmy.dbzer0.com 7 points 1 week ago* (last edited 1 week ago)

Exactly zero of my appliance clocks are set. Microwave and coffee makers all get the power strips shut off between use to reduce ghost power draw, and rofl im not setting them back up every time, and my power goes out often enough that I don’t bother with the oven clock either.

My ex used to set them all whenever they came over, cuz it bothered them. I don’t even notice. There are no working clocks in the kitchen, and I don’t need any.

[-] aeronmelon@lemmy.world 10 points 1 week ago

The dreaded blinking 00:00. Only it continues to increment minutes so you come back and it’s blinking 3:44.

[-] Rocketpoweredgorilla@lemmy.ca 11 points 1 week ago* (last edited 1 week ago)

I kinda like those.. they let you know how long ago the power was out. useless information to have but I still like to know. Be nicer to know for how long it was out.

[-] CalypsoGirl@lemmy.today 2 points 1 week ago

It's actually quite interesting & useful information to at least know how long the power has been back on.

Helpful when we also know what time the power went out.

Helps us know whether or not to worry about items in the fridge/freezer.

[-] Psythik@lemmy.world 2 points 1 week ago

I used to plug in my clock exactly at midnight so I wouldn't have to go through the hassle of setting it. Also, blinking clock = less electricity use powering the display.

[-] Winter_Oven@piefed.social 15 points 1 week ago

Obviously the solution is a local NTP server that your appliances can check against.

[-] miked@piefed.social 9 points 1 week ago

My appliances are not and will not be connected to any network.

[-] shroomato@lemmy.world 2 points 1 week ago

Lest someone hacks my oven and sets it to uhh... -50 degrees?

load more comments (1 replies)
[-] grue@lemmy.world 5 points 1 week ago

Literally the only, single, solitary "smart" function I want in my appliances.

[-] ayyy@sh.itjust.works 7 points 1 week ago

They could just use radio time for like 50 cents in parts but that wouldn’t stalk you and collect all your data.

[-] finalarbiter@lemmy.dbzer0.com 6 points 1 week ago* (last edited 1 week ago)

I would actually prefer if my appliances didn't all have a clock in them at all. I understand needing one on the coffee maker for scheduled brews, but my microwave and oven have no need to use their display outside of normal use

[-] grue@lemmy.world 2 points 1 week ago

Agreed about the oven, but the microwave needs all the parts for a timer, which means it can also be a clock for free.

[-] finalarbiter@lemmy.dbzer0.com 3 points 1 week ago

Yeah but I can't turn the clock off either. If I could disable it, I wouldn't care that it was there.

[-] potustheplant@feddit.nl 3 points 1 week ago

Beg to differ. Setting the time takes like 15 seconds.

[-] BorgDrone@feddit.nl 5 points 1 week ago

My ovens actually do query an NTP server, although one from the manufacturer. I wonder what happens if I advertise a local NTP through DHCP, will they ignore it or use it over the manufacturers NTP.

[-] vaionko@sopuli.xyz 5 points 1 week ago

Obviously you have to MITM the request and forward it to your local NTP.

[-] spicytuna62@lemmy.world 13 points 1 week ago

Hear me out. It is time we end daylight savings, but the issue stands at where to set the clocks. I think that's where some people disagree. Time zones are made up anyway. There's nothing stopping a state from splitting the difference. We should move the clocks back in the opposite direction 30 minutes from where it was previously moved, then just leave it alone. Forever. Stop disturbing our sleep cycles. Stop making us change offline clocks. I want to set my clock once, then ignore it until the battery dies.

[-] Rocketpoweredgorilla@lemmy.ca 7 points 1 week ago

We just stopped flipping our clocks this year in parts of Canada. There's been a bit of confusion because some automatic stuff changed anyway but overall it's been fine so far.

[-] DarkSirrush@piefed.ca 4 points 1 week ago

Microsoft has been my biggest headache, so many meetings got permanently shifted by an hour because they vibecoded that timezone change.

[-] DarkSirrush@piefed.ca 4 points 1 week ago

BC gave up waiting for our southern neighbours this year, and it significantly reduced the number of dead deer on the highway the past few weeks (the death count usually skyrockets for a few weeks during the changeover).

We ended up settling for a permanent gmt-7, where we were previously gmt-8.

[-] HeyThisIsntTheYMCA@lemmy.world 1 points 1 week ago
[-] DarkSirrush@piefed.ca 2 points 1 week ago

We actually signed it into law years ago, and then Trump happened which delayed us actually doing it.

[-] Flower@sh.itjust.works 3 points 1 week ago

I want to set my clock once, then ignore it until the battery dies.

I feel the same way, so that's why all our clocks are radio controlled. Even the old analog clock got its mechanism replaced by a radio controlled one.

[-] finalarbiter@lemmy.dbzer0.com 3 points 1 week ago* (last edited 3 days ago)

Agreed that daylight savings is dumb and should end. That said, time zones are typically in 1 hour offsets because it's a reasonable increment and makes the math between time zones easier. The time we end up in should line up with the existing international time zones instead of making up more shit to replace it.

[-] user224@lemmy.sdf.org 11 points 1 week ago

Just stick to UTC year-round. Problem solved.

[-] SeductiveTortoise@piefed.social 9 points 1 week ago

I mean, obviously this is correct. And if you're extra fancy, you can place a Post-it note with the current local time delta next to it.

[-] HeyThisIsntTheYMCA@lemmy.world 1 points 1 week ago

be super fancy and post local noon every day

[-] grue@lemmy.world 4 points 1 week ago

Until you get a power outage and it resets.

[-] chiliedogg@lemmy.world 9 points 1 week ago

The clock in my van just corrected itself a few weeks ago!

[-] SeductiveTortoise@piefed.social 8 points 1 week ago

There is absolutely no way my fucking seven hundred euro oven shouldn't set it's time automatically. The the technology is there, it's cheap, and it would make my life so much easier.

I mean that little small part of my life. But you know what I mean...

[-] hereiamagain@sh.itjust.works 8 points 1 week ago

Careful, they'll do it by connecting to WiFi. Don't worry, they'll "only" use it for setting the time.

But yeah, it really should use the atomic clock radio frequencies.

[-] SeductiveTortoise@piefed.social 4 points 1 week ago* (last edited 1 week ago)

No, I'm talking about this:

https://en.wikipedia.org/wiki/Radio_clock

And that's available since the seventies.

[-] hereiamagain@sh.itjust.works 3 points 1 week ago

Yep exactly that!

Sorry, communication is hard, believe it or not I was talking about exactly that 😬

load more comments (2 replies)
[-] HeyThisIsntTheYMCA@lemmy.world 7 points 1 week ago* (last edited 1 week ago)

i got a clock where it has up and down buttons, so changing the time is really easy either direction.

it was so easy with analogs, you'd just turn the wheel on back twice a year. okay, four times a year if you're like me and fuck it up the first time every time.

[-] MeThisGuy@feddit.nl 3 points 1 week ago

you just have to turn it clock wise

[-] HeyThisIsntTheYMCA@lemmy.world 2 points 1 week ago

Yeah but clockwise from the front is anticlockwise from the back.

[-] Test_Tickles@lemmy.world 2 points 1 week ago

That's what she said.

[-] faercol@lemmy.blahaj.zone 6 points 1 week ago

All my appliances are drifting in different ways anyway, so I'm just assuming nothing in my kitchen has the correct time

[-] Freeposity@lemmy.world 6 points 1 week ago

It's right less than half of the year since daylight savings time lasts 34 weeks.

[-] pelespirit@sh.itjust.works 8 points 1 week ago

Or more than half the year, depending on when the stove broke.

[-] baldingpudenda@lemmy.world 2 points 1 week ago

I hate those 2 to 3 weeks where I forget that it's ahead an hr and I star to panic that I'm late AF

[-] Rcklsabndn@sh.itjust.works 4 points 1 week ago

Look at the queen of England over here with a clock on her stove. Mine just makes two different fires: inside or outside.

What is the oven temp? Usually hot enough or too hot.

[-] CalypsoGirl@lemmy.today 3 points 1 week ago

That's how I treat my car. On November 1st my car clock was finally accurate again for the first time in 6 months.

[-] fedikitty@piefed.social 2 points 1 week ago

Just keep one appliance on daylight savings time and the other on canada time.

[-] fedikitty@piefed.social 2 points 1 week ago
[-] FavouriteShapes@sh.itjust.works 1 points 1 week ago

You can do it while you let something boil

load more comments
view more: next ›
this post was submitted on 12 Nov 2026
658 points (98.4% liked)

People Twitter

10633 readers
685 users here now

People tweeting stuff. We allow tweets from anyone.

RULES:

  1. Mark NSFW content.
  2. No doxxing people.
  3. Must be a pic of the tweet or similar. No direct links to the tweet.
  4. No international politcs
  5. Be excellent to each other.
  6. Provide an archived link to the tweet (or similar) being shown if it's a major celebrity, figure or any politician
  1. If a tweet (or similar) makes a statement of fact, either mark it as "satire" in the body or provide the original source link backing up the statement (see rule 6)

founded 3 years ago
MODERATORS