59

I know speed queen is the best, but that's too expensive for me to justify at the moment. I had the set that came with the house but the washer quit on me a few months ago, and the dryer looks to be from the early 90's so it's probably not long for the world either. I've been going to the Laundromat cause I simply didn't want to deal with it.

However we're working so much overtime now that I just can't blow an hour per week sitting down for that. The dogs already made at me for how much time I'm gone. So anyways, what's the best bang for your buck washer and dryer set? Samsung is out of the question and no IoT sets.

top 50 comments
sorted by: hot top new old
[-] Reygle@lemmy.world 3 points 1 day ago

Any washer/dryer combination you can find USED in good working condition that has absolutely ZERO internet connectivity is the thing to get. I'd check local Habitat for Humanity "ReStore" resources if it were me.

I'd rather have a 15-20 year old set than anything new.

[-] stringere@sh.itjust.works 3 points 1 day ago

We have an LG All-inOne top loading washer/dryer. Other than occassionally draining and cleaning the filters as maintenance it has been working great. We can tell when we need to do the maintenance stuff when 6 minutes remaining lasts an hour or longer.

[-] blargh513@sh.itjust.works 8 points 2 days ago

I've gone through a number of machines in the past 15-20 years as I've had to move a bit (not moving machines).

My least favorite were any of the front loaders I've had. They washed ok, but the big front gasket always got gross and demanded frequent wiping/drying and you had to leave the door open or it would get mildew. One of them (electrolux) would frequently refuse to run the spin cycle. I had to learn the secret button combination to force a spin cycle. It also had a drain filter that was meant to catch lint and junk. It was only accessable if you tipped the machine over as the access was from underneath the machine. Terrible design.

I had another front loader, and it wasn't as bad, but still mouldy gasket and stinky laundry from time to time. If you forgot and left a load in overnight, it was fetid. I became aware that using vinegar was very effective to de-stink towels that always had a stinky odor about them. Needed to do it a few times a year.

I had a cheap set of whirlpools for about two years, they were fine, but at that age, they should be.

Moved into a house with a fancy set of whirlpools, wifi and all that junk. Never used the app stuff, but the washer self-destructed about three years after I moved in. I don't think they were very old when we got here. Some metal plate that the wash drum sat on, cracked and during a spin cycle it shattered making a horrible noise and that was that. Did not even bother trying to fix it.

I have a speed queen washer now and a bobo free gas dryer my brother gave me. Washer has been fine for about three years, no issues, washes a full load in 30 min. Very few options, it's the basic model. The dryer shat a belt which I fixed with an accessory belt from a Chevy Trailblazer that I cut to be thin enough. Claude helped me find a belt that was the right length, who says AI is useless?

My wife's grandmother had THE cheapest washer from home depot, I think it was branded as a Roper or something. It never had issues.

Some of my friends have LG machines. In both cases, there is a little flap on the front you are supposed to open and a hose with a plug inside. They say you have to pull the plug and drain the excess water after each load or the machine will stink. You also have to leave the door open. This seems like a lousy design.

[-] whaleross@lemmy.world 1 points 1 day ago* (last edited 1 day ago)

There was a ten year old LG all in one combo in my place when I moved in. It's been three years and it's working great. There is some "smart" functionality to it but I keep it offline so it will not be disabled by a timer or an update. I don't have much experience with consumer model washer/dryers as we have communal industrial grade ones here in socialist hell Scandinavialand, but I'd recommend it.

[-] buttmasterflex@piefed.social 9 points 2 days ago

Amana makes simple, reliable machines without any of the WiFi connected bullshit. We've had ours for the last 8.5 years and only had to replace a dryer belt earlier this year.

[-] ShankShill@sh.itjust.works 1 points 1 day ago

My LG set has been going for 15 years or so.

Had to replace the valve assembly (wouldn't stop filling, ~$40) and springs on the top load washer (kids played hide and seek and used the washer... ~$30 or so) and the dryer steam function doesn't work anymore. Doesn't detect water in the tank. Don't care enough to fix it.

Otherwise, been solid.

[-] SalmiakDragon@feddit.nu 11 points 2 days ago* (last edited 2 days ago)
[-] MrOtingocni@lemmy.world 5 points 2 days ago
[-] i_stole_ur_taco@lemmy.ca 26 points 2 days ago

I’ve had good luck with LG buying new.

If I didn’t care about anything fancy, I’d probably talk to the local repair shop that refurbishes old units and sells them on the cheap with their own warranty.

[-] FlashMobOfOne@lemmy.world 8 points 2 days ago

This. I've heard so many horror stories about new appliances not lasting more than a couple years, tops.

When I have something I need to replace I'm going to go the second-hand route myself. Could not care less if it's 10-20 years old.

load more comments (2 replies)
[-] cuboc@lemmy.world 14 points 2 days ago

OP: Where are you located? I can imagine the EU market being different than, say, the eastern Asian market.

I live in the EU, and the top brands appear to be Miele (although quite expensive) and Bosch / Siemens (better bang for buck). I have a Bosch dryer that has lasted almost a quarter century and is still going strong. My current washing machine is a 15 year old LG, so I am happy with the bang/buck ratio there. I did have the motor replaced though at one time, so that is a bit of a cheat.

[-] shartgargle@lemmy.zip 4 points 2 days ago

I live in the US.

[-] lemming741@lemmy.world 6 points 2 days ago

It might be the humid climate here in the SE US, but everyone i know with a front loader has mildew problems. Tablets, coatings, sani cycles- all band-aids for inherent design problems.

[-] brygphilomena@lemmy.dbzer0.com 2 points 1 day ago

I've heard the same from my family in the northern Midwest. Front loaders just can't be kept closed it seems or mildew forms.

[-] Onomatopoeia@lemmy.cafe 5 points 2 days ago

You can get used commercial speed queens for a similar price as new consumer units.

The nice thing is the commercial units are designed to be maintainable. Parts are available, and they're designed to run for years in rough environments.

[-] yaroto98@lemmy.world 19 points 2 days ago

Fun story the motor in every dryer that turns the drum is made by the same company.

Also, anything except for samsung.

2nd fun fact. Microwaves are all made by the same company too.

[-] dual_sport_dork@lemmy.world 13 points 2 days ago

That'a not quite true. Microwave components are made by one of about three manufacturers, which is slightly better but not by much. Sharp, LG, and Panasonic to my knowledge.

[-] CompactFlax@discuss.tchncs.de 4 points 2 days ago* (last edited 2 days ago)

True. Panasonic “inverter” microwaves are still Panasonic though, I think.

Also, Refrigeration is Midea, Daikin, and a handful of others in very limited applications; some American made AC, Mitsubishi heat pumps, Liebherr refrigerators.

Tv and computer panels are similar - I think it’s LG, Samsung, and one or two Chinese companies in the market. That Dell display? The Apple display? Probably LG.

[-] proudblond@lemmy.world 2 points 2 days ago

I actually don’t hate my Samsung washer/dryer all in one unit but at the same time I don’t blame anyone for avoiding that brand like their lives depended on it.

[-] shartgargle@lemmy.zip 2 points 2 days ago

That actually doesn't surprise me at all.

[-] leapsy@lemmy.world 2 points 1 day ago

In what way is the washer broke? If it's old enough it may be worth fixing instead of buying something that won't last as long.

[-] some_kind_of_guy@lemmy.world 2 points 1 day ago

Came here to say this. I've got a set of speed queen maytags from the early 00's. The circuitry is dead simple. Every few years one of them will demand a repair, but they're easy to diagnose (get a multimeter). So far the replacements have been in the $5-$15 range for parts plus an hour or so of my time (including diagnosis, ordering replacement parts and the actual time spent swapping it out).

[-] lennybird@lemmy.world 8 points 2 days ago

If not premium speed queen, then LG base models are best bang for buck I could find in terms of reliability.

[-] crenquis@lemmy.today 2 points 1 day ago* (last edited 1 day ago)

We have Maytag that are rebranded LGs from ~20 yrs ago. They've been pretty good. I did have to replace the main board in the washer at ~yr 5 (assume that was a fluke) and have replaced the drain pump twice (assume that might be a 10yr life on the pump) . (both are relatively simple repairs). The dryer hasn't had any issues.

[-] littleomid@feddit.org 7 points 2 days ago

After a long search, we went with AEG. No smart, app based, AI bullshit. Just an analog washer dryer.

[-] 01189998819991197253@infosec.pub 8 points 2 days ago* (last edited 2 days ago)

Not Samsung, they're fancy, expensive trash. Not Whirlpool or Whirlpool brands, unless you want to replace 2 years 1 month (to the day) of purchase. I'm in a similar boat as you.

Edit. 2 years 1 month, by the way, is 1 month past the manufacturer's warranty, which is trash anyway.

[-] Fondots@lemmy.world 10 points 2 days ago

My previous wash & dryer were LG, and lasted probably about 15 years. We replaced them with new LG ones, and they seem to be largely about the same build quality. We've only had them for about a year, so I can't say for certain, but so far no issues.

They do have IoT features, they're optional though and would work fine without hooking them up to the internet. If you do have smart speakers and such, it is kind of nice to have them let you know when they're done running because we can't hear them go off in the basement from upstairs.

We also sprung for the pedestal washer, which has been great. I was skeptical about it but I find myself using it a lot for when you have just a couple things that have special washing instructions or just a bit more than you can fit in the main washer. It's also nice having the washer and dryer being a little higher to load/unload, and the pedestal drawer under the dryer is nice for storing detergent and such.

[-] shartgargle@lemmy.zip 4 points 2 days ago

Well buying the same brand again says quite a bit. I swear I'll never buy anything but Toyota ever again.

[-] Sibbo@sopuli.xyz 6 points 2 days ago

Bosch works well.

[-] rem26_art@fedia.io 8 points 2 days ago

My parents bought an LG washer about 6 years ago thats still working fine. (They're still using their Maytag dryer from the mid 90's) No issues with it. It has some IoT stuff, but you can just not connect it to any network and it still works. The advice they received when they were shopping around was "anything but Samsung"

[-] BurgerBaron@quokk.au 2 points 1 day ago

My dryer and washer are front loading LG from 2011 and still working, but that doesn't mean anything for current day brand quality.

[-] shartgargle@lemmy.zip 3 points 2 days ago

Yeah I've heard the same.

[-] lemmyng@piefed.ca 5 points 2 days ago

Find a local appliance repair shop that you trust, and ask them which ones are easiest and fastest to service. Speed Queen may be more reliable in laundromats where they can be fine with one washer down for a month, but at home you only have one, and anything more than a 3 day wait time is impractical. Therefore your best value is going to be whichever model can be brought back to operation the fastest without breaking bank.

[-] Hi_ImAmber@piefed.ca 6 points 2 days ago

My In-laws have speed queens and they are the loudest and jankiest washer and dryer I have ever seen. And they have had to have them serviced as much as my 10 year old Samsung set and they are only a couple of years old.

[-] CompactFlax@discuss.tchncs.de 5 points 2 days ago* (last edited 2 days ago)

Speed queen is junk from the 1960s. Incredibly inefficient and fairly ineffective. Top loaders are a joke.

Miele is modern top end. Bosch is also quite good. Cheaper too.

I have an LG. It is positively violent.

[-] AskewLord@piefed.social 2 points 2 days ago* (last edited 2 days ago)

Look up reviews. It's more the model than the brand.

Typically the best return on your dollar is mid tier models, but not always.

Cost/energy per load is something they test for with consumer reports. typically the oversize loads are cheaper.

I have a double washer and I love it. It did fail a few months after I got it, but was repaired under warranty and has been worth for 6 years w/o issue since. a Samsung

[-] Blackfeathr@lemmy.world 6 points 2 days ago* (last edited 2 days ago)

We have a pair of Maytags from the 1980s. One we got used off Marketplace, the other was sitting in the backyard for a few years and just needed some new parts. Still going strong. 40+ years. They don't make them like that anymore.

[-] agamemnonymous@sh.itjust.works 3 points 2 days ago

They do actually, if you get the commercial model

[-] zoloftt@lemmy.world 1 points 2 days ago

Everyone's dumping on Samsung. I will say, I will never buy a Samsung fridge again.

I have a Samsung top loader washer and front loader Dryer purchased in May 2022.

Aside from a couple issues with the washer experiencing an unblance problem, they've been great.

I will avoid buying a dryer with the "hinged" lint trap in the future. That's honestly my only beef. The dryer sensor is useless too, I set most things to the "bedding" setting, because otherwise a third of the laundry comes out a little damp.

[-] thesohoriots@lemmy.world 5 points 2 days ago* (last edited 2 days ago)

I talked to an appliance repair guy recently about the longevity of washers and he said the front-load tended to last longer, for whatever that’s worth.

Used to be the opposite was the case. But I suspect residential front loads have been around long enough to work most of the kinks out. And, if the tub seal fails in a top load, theres a good chance you have to replace ths entire drive mechanism which is like 40% of the cost of a new washer.

[-] shartgargle@lemmy.zip 2 points 2 days ago

Huh, that's interesting. I was anticipating what you were going to say until the end. That's kinda surprising, but I guess if I saw blue prints, or took one of each apart to see how the mechanisms work, it might make sense. I've just never really bothered or had a chance.

[-] neidu4@piefed.social 5 points 2 days ago
[-] SolacefromSilence@fedia.io 4 points 2 days ago

Honestly, I suggest to keep the settings/options basic and don't buy the cheapest units.

I have a Samsung pair in 2010 from before they shit the bed and have been happy.

With that said, I have replaced a water pump (year 2) and water-inlet solenoid valve (year 15)... then a dryer belt (year 13) and gas-inlet solenoid valve (year 15). Fingers crossed and thanks to all the youtube videos for keeping them running.

[-] DudeImMacGyver@kbin.earth 1 points 2 days ago
[-] LastYearsIrritant@sopuli.xyz 1 points 2 days ago
[-] micgerne@lemmy.dbzer0.com 4 points 2 days ago

Bosch.

Not Fisher & Paykel, they're crap.

[-] Brkdncr@lemmy.world 3 points 2 days ago

If buying new id get one of the larger heat pump units that also dries. Get all that space back from having a dryer.

[-] lemming741@lemmy.world 3 points 2 days ago

My brother in law has one, said you can only do one load at a time and it takes 4 hours. He has to do a load every afternoon he is home to keep up.

load more comments
view more: next ›
this post was submitted on 15 Nov 2026
59 points (98.4% liked)

Ask Lemmy

42427 readers
1647 users here now

A Fediverse community for open-ended, thought provoking questions


Rules: (interactive)


1) Be nice and; have funDoxxing, trolling, sealioning, racism, toxicity and dog-whistling are not welcomed in AskLemmy. Remember what your mother said: if you can't say something nice, don't say anything at all. In addition, the site-wide Lemmy.world terms of service also apply here. Please familiarize yourself with them


2) All posts must end with a '?'This is sort of like Jeopardy. Please phrase all post titles in the form of a proper question ending with ?


3) No spamPlease do not flood the community with nonsense. Actual suspected spammers will be banned on site. No astroturfing.


4) NSFW is okay, within reasonJust remember to tag posts with either a content warning or a [NSFW] tag. Overtly sexual posts are not allowed, please direct them to either !asklemmyafterdark@lemmy.world or !asklemmynsfw@lemmynsfw.com. NSFW comments should be restricted to posts tagged [NSFW].


5) This is not a support community.
It is not a place for 'how do I?', type questions. If you have any questions regarding the site itself or would like to report a community, please direct them to Lemmy.world Support or email info@lemmy.world. For other questions check our partnered communities list, or use the search function.


6) No US Politics.
Please don't post about current US Politics. If you need to do this, try !politicaldiscussion@lemmy.world or !uspolitics@lemmy.world


7) No Hit-and-Run questions.
Please don't delete your post for no apparent reason. If you plan on deleting a question later, say so in the post, or if you feel that you have a good reason to remove it, message a mod beforehand. It's not fair to the ones who took their time to answer, and it's not in the spirit of the community.


8) No Bots.
Posts or comments from bots, LLM's, AIs, Neural Networks, Transformers, or Marvin the Paranoid Android are not welcome in AskLemmy. Real humans only please.


Reminder: The terms of service apply here too.

Partnered Communities:

Tech Support

No Stupid Questions

You Should Know

Reddit

Jokes

Ask Ouija


Logo design credit goes to: tubbadu


founded 3 years ago
MODERATORS