Waterdoc

joined 9 months ago
[–] Waterdoc@lemmy.ca 14 points 6 months ago (1 children)

Not not contaminants are anthropogenic. Decomposing organic matter, heavy metals from soil and rock erosion, microorganisms and microbial by-products all naturally occur in wetlands and are dangerous to us. There's nothing wrong with that, just don't drink it or get it in open wounds :)

[–] Waterdoc@lemmy.ca 34 points 6 months ago (4 children)

Clean is relative, there are lots of contaminants in wetland water that make it unsafe. They are incredibly important and very useful for naturally cleaning water, but please don't drink the swamp water.

[–] Waterdoc@lemmy.ca 6 points 7 months ago

It's not nothing, it's just below the freezing point of water. Zero energy is zero Kelvin. This is also a bad take because Fahrenheit also goes negative. I suppose you should just start using Kelvin if that is your opinion.

[–] Waterdoc@lemmy.ca 2 points 8 months ago

Groundwater does not typically contain many particles because (a) water moving through the ground gets naturally filtered and (b) groundwater is typically anoxic, which causes certain things to dissolve. Accordingly, most filtration systems for well waters are focused on removing those dissolved contaminants.

The most common well water treatment is water softening. These systems remove hardness from your water (cations, typically calcium and magnesium). Water softeners are usually ion exchange based, so basically you are swapping out the calcium or magnesium for sodium or potassium.

Some wells have dissolved metals (manganese or iron are common) that can stain fixtures and laundry (manganese can also cause health problems for children). Arsenic is also common in some regions, which causes cancer, and hydrogen sulfide, which causes a rotten egg smell. All of these can be removed using a special filter system, which uses catalytic oxidation to oxidize and remove these contaminants. These systems typically use manganese oxide (often called greensand) and chlorine.

To remove salts or microbial contaminants it is common to use a reverse osmosis (RO) membrane filtration system. These systems reject salt ions and microorganisms by a combination of small pore sizes and charged surfaces - the salt ions can't pass through a positively charged surface because of electromagnetic repulsion.

If you have well water you should get it tested regularly and make sure your treatment system is appropriate for your water!

[–] Waterdoc@lemmy.ca 2 points 8 months ago (2 children)

There are two approaches here. First, if you have a well, you can get a pressure filter system installed. Different systems achieve different things, such as reducing the hardness or removing iron and manganese or sulfur.

Second, if you have municipal water, you could get a tap filter. This type of filter goes directly on your tap and is used to remove particles. Usually these are overkill, but they use them in areas with lead pipes to reduce lead exposure (they will remove the pipes eventually, but it will probably take a decade or more in some cities). Your classic pour over Britta doesn't do anything for particles, instead it adsorbs certain dissolved contaminates and removes residual chlorine. This may make your water taste better, but it won't protect you from lead if you have lead pipes.

Unfortunately there really isn't a replacement for these types of adsorptive filters because they work using activated carbon. Activated carbon comes from natural products (primarily coal, but also coconut shell and other materials), but it has to undergo a heating process to "activate" it, which goes well beyond what you can do at home. That said, other than the improved taste there is likely no benefit to using it, and you can dechlorinate your water by simply leaving a jug in the fridge for a few hours.

If you are on a well I can explain some of the other options!

[–] Waterdoc@lemmy.ca 3 points 8 months ago

That's certainly unusual. Does this occur after having water sit, or is it after cleaning them? You should call your water provider to report it and ask for their advice. If it isn't something your neighbours are dealing with then it's probably (a) something to do with your dish soap, or (b) the plumbing in your home. Regardless, that's not normal and you should call your water provider.

[–] Waterdoc@lemmy.ca 15 points 8 months ago (8 children)

Water infrastructure is very expensive and the industry is dealing with more problems than ever before (impacts of climate change, PFAS, aging infrastructure). Lots of money and effort is needed to fix these problems, but it is worth remembering that tap water is safe for the overwhelming majority of consumers in developed countries. It is worth knowing more about your drinking water, but don't assume that your water is dangerous because of headlines like this.

Feel free to ask any specific questions you might have about your water!

[–] Waterdoc@lemmy.ca 7 points 8 months ago

Abolished is one way to put it... I suspect Louis had stronger words when it was his turn to meet Madame Guillotine.

[–] Waterdoc@lemmy.ca 4 points 8 months ago

Most toilet papers are fine, although some systems struggle with Costco's stuff. Toilet paper is designed to break apart in water. That said, you shouldn't flush any other products. Paper towels don't break down the same way, and wipes will almost certainly cause damage, even if they are marketed as flushable!!

[–] Waterdoc@lemmy.ca 13 points 9 months ago (1 children)

Math using janky excel spreadsheets, tell drafters what we want drawings to look like, but mostly a lot of reading and writing. The secret to engineering (at least in my area) is that communication skills are just as important as technical understanding.

[–] Waterdoc@lemmy.ca 7 points 9 months ago (1 children)

You gotta flush the tap for a bit. When water is stagnant in your pipes overnight contaminants can leach into it (including lead if you have lead pipes or lead in your fixtures).

view more: ‹ prev next ›